E74A35
LEMON DUCKLING
DOWNLOAD & INSTALL
requires version 0.7B and up
Uploaded by :
Skin ID :
E74A35
Approved :
NO
Published :
(version 2)
Downloads :
5245 - online now : 0
Access :
Public
Vehicle class :
Saloon car
Drive side :
Can choose drive side
Engine :
425 cc inline 4 / Front wheel drive
Power :
10 kW (13 bhp) @ 3947 rpm
Torque :
29 Nm (21 lbft) @ 2534 rpm
Total mass :
479 kg (1056 lbs)
Power-weight :
21 W / kg (28 bhp/ton)
Transmission :
H-pattern gearbox
Fuel tank size :
20 litres
Information
Comments (23)
Changelog (2)
Skins
Setups (0)
Description
1950s legendary slow car from France
The Lemon Duckling was a small budget car designed in 30s and manufactured from 40s to 90s. The car was famous for its unique design and suspension and soon became a French icon. The suspension was designed to be able to drive over a plowed field without breaking eggs in a basket.
This mod is based on an early super-slow "ripple bonnet" and "umbrella" models and a lap around Blackwood can take a couple of hours. Despite that, these cars were a popular base for a cheap race cars. There was a wide range of available modifications, from cheap basic race cars, through fast 24-hour specials, endurance rally cars and 4x4 crawlers. Therefore the car was made mainly to have a fun with LFS physics and to provide a base for some future racing mods.
Realism note
The IRL car has an extraordinary suspension where a special link between front and rear wheels enables an extremely soft suspension. Combined with 15° caster, it is almost impossible to roll over (without some terrain obstacles) despite ridiculous tilt during cornering. Tried to approximate this using a linear front suspension + extended suspension travel + slightly smaller 15 inch wheels (used on later models IRL).
Making derivatives
This mod was made as a base for some future racing mods. If you are going to make one, please do not make sleepers and follow IRL specifications (for example https://www.autosport.com/nati ... ikeliest-race-car/8082299)
This mod is based on an early super-slow "ripple bonnet" and "umbrella" models and a lap around Blackwood can take a couple of hours. Despite that, these cars were a popular base for a cheap race cars. There was a wide range of available modifications, from cheap basic race cars, through fast 24-hour specials, endurance rally cars and 4x4 crawlers. Therefore the car was made mainly to have a fun with LFS physics and to provide a base for some future racing mods.
Realism note
The IRL car has an extraordinary suspension where a special link between front and rear wheels enables an extremely soft suspension. Combined with 15° caster, it is almost impossible to roll over (without some terrain obstacles) despite ridiculous tilt during cornering. Tried to approximate this using a linear front suspension + extended suspension travel + slightly smaller 15 inch wheels (used on later models IRL).
Making derivatives
This mod was made as a base for some future racing mods. If you are going to make one, please do not make sleepers and follow IRL specifications (for example https://www.autosport.com/nati ... ikeliest-race-car/8082299)
Development thread: https://www.lfs.net/forum/thread/107068
Copyright Information
License applicable to elements used in this Vehicle Mod
The author of this Vehicle Mod has indicated that this work is an original creation and has provided the following description of the approach:The textures and the 3d model are made from scratch by the author (using Blender, GIMP and LFS Editor).
Redistribution / modification permission
The author of this Vehicle Mod has provided the following license, defining how this work can be redistributed, shared or modified:License type : LFS Vehicle License
Derivatives are allowed : YES
Intellectual property
This Vehicle Mod is inspired by another vehicle.The mod is a tribute to the legendary Citroën 2CV. Design and technical specification is based on an early AZ model from the Adventures of Tintin comics. The blue dotted skin is inspired by a 1995 movie "The Garden".
Exterior proportions were set according to blueprints from:
https://www.heller.fr/downloads/1000561750_MA_CITROEN_2CV_Building_instruction.pdf
Interior proportions were set according to the following webpage:
https://www.citroenorigins.fr/fr/vehicule/2cv
Technical parameters were tuned according to a repair manual and following sources:
http://www.citroenet.org.uk
http://www.citroen-rosalie.fr
https://auta5p.eu
https://www.wikipedia.org
https://www.youtube.com/watch?v=j7pFxgDmZXQ
Some technical details were changed to meet the requirements of the Live for Speed physics.
Exterior proportions were set according to blueprints from:
https://www.heller.fr/downloads/1000561750_MA_CITROEN_2CV_Building_instruction.pdf
Interior proportions were set according to the following webpage:
https://www.citroenorigins.fr/fr/vehicule/2cv
Technical parameters were tuned according to a repair manual and following sources:
http://www.citroenet.org.uk
http://www.citroen-rosalie.fr
https://auta5p.eu
https://www.wikipedia.org
https://www.youtube.com/watch?v=j7pFxgDmZXQ
Some technical details were changed to meet the requirements of the Live for Speed physics.
Disputes
Vehicle Mods have to undergo a review process to hopefully avoid any future disputes about inappropriate or unauthorised content.If however some detail has been overlooked during the review process and you wish to address this, you can file a dispute by contacting the LFS developers.
We will review every report and typically get back to you within 48 hours.
Included Skins
Skin Templates Kit
The LFS Vehicle editor provides options to create skin templates. A template helps you create skins for a vehicle by giving you the outlines of the vehicle's shape, within which you can draw the livery that will be drawn onto the vehicle.
There are 4 types of templates:
- Shaded skin template
- Black and white skin template
- White background wireframe template
- Black background wireframe template
No skin templates kit has been provided by the creator of this vehicle mod.