riskredruM great work again You are allmoust finist with this project.
Ok maybe the last request of me .Can you add one simple low fuel indicator? like the other ligths ,but with one speciality. some xy number in % thats starts the light glow.
Exaplne : LOWFUELLigt_min = 10
The light go on when in the fuel tank is only 10% of fuel.

Thanks

Quote from riskredruM :

Update, See first post.

tested ,works

Thanks

I try to set it up and if all works i sent you the setting by PM.

Quote from Dudles :

NSX-R Dials



Mods :
*Streched the scale to have an idle position more accurate ( Speed it was in 10 KPH and RPM it was on 500 RPM )
* Added another LED ( blue ) for TC.
* Added a Gear display not "covering" anything in the dial.
* RPM on the left, Speedo on the Right, just like the NSX's
* Covers Exactely The Speedo and RPM on LFS but not Fuel Gauge ( Covers just a little bit of Turbo gauge, but nothing is perfect in the world, and who needs Turbo gauge if turbo's don't brake @ LFS ).
* All Three LED's Working ! And in the right positions !
Red = Shiftlight
Green = ìt Limiter
Blue = TC

Hope you Like it.

Tomorrow I'm Gonna try a SIR-II Civic Hole cluster Ingame ( just speedo, RPM and LED's working thow ).

MAN great work ,,I do exactly the same gauges ,,but your speedo is no t callibratet correctly

[SPEED]
Pos_X=68.7
Pos_Y=87.0
Width_Scale=.75
Height_Scale=.75
min_value=10.0
max_value=290.0
min_angel=136.15
max_angel=-131.53
direction=1
typ=1

This is the right one ,try it

if to run it with IP 127.0.0.1 (thats default your PC) you can use it ,to stats ,your single race ,replays etc. Not for servers only. Most users use it from replays with the IP:127.0.0.1. So try it ,you will see.

Ok I test it ,the single player is not working in this new version of LFSstats.

question ,you tried LFSlapper? Both program are quiet similar to use on client side( Is't so that your PC is the server in that moment).

Last edited by BranislavS, Thu 28 Jun 2007, 08:29.

LFSstats

http://www.lfsforum.net/showthread.php?t=24933

Last edited by BranislavS, Wed 27 Jun 2007, 23:04.

Ok it's works perfect.

When i look on the gauges something is missing. Can you add some LED indicators for rev limiter and for Pit limiter? Traction control LED aswell. So i can put the indicators in tiese holes .

Are the needels on the Top layer?so when the needle is over the indicator it covers it?

Thanks ,you are the man!

Btw. don't need shift indicator

online works only at your car.


riskredruM : I got a one simple request (eine kleine bitte). is posible to write the program so ,that I can addust the position of both meters separate? not both together.

I mean that in most cars is the RPM meter on left side and speedo on right. But the main situation is the placing it on the side lide this http://skyline179.tripod.com/skyliner34/interior.jpg (on picture are the two white gauges on right).

Thanks

Quote from MikeyRulesD :

I don't see that in the guage.ini file =\ Do i have to add in the max and min angles on the file?

EDIT: Ah nvm i see, i have to add them in

no you must have a new version ,see the ohter post
http://www.lfsforum.net/showthread.php?t=26643

Quote from BoyGTA :

I got it to works fine now. I've setted from -1 to 1 and now is ok.
But my game works at 60fps and the needles goes at 15fps, why?

Try this:
-change the settings in your cfg.txt (in LFS Folder) to that
OutGauge Mode 2
OutGauge Delay 1 - this was 10 (10ms I thing ,less number more fluidy)
OutGauge IP 127.0.0.1
OutGauge Port 30000
OutGauge ID 0

I thing is limited by outgauge

Quote from Scawen :

This can be controlled by 5 lines in the cfg.txt file :

OutGauge Mode 0 :0-off 1-driving 2-driving+replay
OutGauge Delay 1 :minimum delay between packets (100ths of a sec)
OutGauge IP 0.0.0.0 :IP address to send the UDP packet
OutGauge Port 0 :IP port
OutGauge ID 0 :if not zero, adds an identifier to the packet

Each update sends the following UDP packet :

unsigned int Time; // time in milliseconds (to check order)
char Car[4]; // Car name
word Flags; // Combination of OG_FLAGS, see below
byte Gear; // Reverse:0, Neutral:1, First:2...
byte SpareB;
float Speed; // M/S
float RPM; // RPM
float Turbo; // BAR
float EngTemp; // C
float Fuel; // 0 to 1
float OilPress; // BAR
float Spare1;
float Spare2;
float Spare3;
float Throttle; // 0 to 1
float Brake; // 0 to 1
float Clutch; // 0 to 1
char Display1[16]; // Usually Fuel
char Display2[16]; // Usually Settings
int ID; // (optional ID - if specified in cfg.txt)

#define OG_SHIFTLIGHT 1
#define OG_FULLBEAM 2
#define OG_HANDBRAKE 4
#define OG_PITSPEED 8
#define OG_TC 16
#define OG_HEADLIGHTS 32
#define OG_SIGNAL_L 64
#define OG_SIGNAL_R 128
#define OG_REDLINE 256
#define OG_OILWARN 512
#define OG_1 1024
#define OG_2 2048
#define OG_3 4096
#define OG_4 8192
#define OG_KM 16384
#define OG_BAR 32768

I can't see anything about tyrepressure ,maybe in setting(but I thing there is only tyre like normal ,slick etc.. ,no momentaly telemetrie data),

Is posibiliti to add to this program some kind of *.ini or *.cfg (or some text) file with a small IP predefitions? Something like drop down menu in the progrram,so the user can change from the (predefined) IP address . exaple:
1.)127.0.0.1
2.)192.168.0.77
3.)55.66.77.11
...etc.

is this posible?

THX

hmm when you watch the replay then you will see the others. When you are online ,plugged on "one" player you will only see the one player (thats the same ,as you can't see others fuel during race). correct mee if I'm wrong

Thanks ,works great

great work man

so the v5 is working with the patch X ,works great ,but it too slow and no way to customize (only discovered moving the map with W,A,S,D keys) but thats all.


any news ? LFS info?

congratulations for all drivers ,and thanks for great racing !

someone vote for restart ,please

got someone the whole replay?

Last edited by BranislavS, Sun 27 May 2007, 14:28.

Quote from VTiRoj :

EDIT: Wow check 10th place, an XFG! Props to that guy

chceck now the 3th place XFG?

Last edited by BranislavS, Sun 27 May 2007, 10:05.

great race guys ,we did it ! hold on ! GO GO

yep it ,would be great. Biohazard on XRG should not give up.

So ,at fist I want to apologize for our #014 team for slowing down guys on Raceserver#3. We are trying to get out off your way ,but sometemes it's imposible and for that we are realy sorry.
The race is going great ,go on.

hmm when I had x850xt pe ,no problems with AA and AF with all catalist drivers ,as I bought x1950xt than starts the problems ,with AA and AF and with mid mapping.. can now use onli car7.3 and 7.4 drivers while 7.2 and earlier dosn't recognize my card . All the problem is when I run more 3D application at the same time . In 7.3cats was for me the problem solved temporary by alt+tab and changing some parameter in cat. In 7.4 solve it the reinstaling the whole driver with cat ,but when I run another 3D app (more than one at the same time) the problem is back. No atitray tool help .

and do you have a LCD or CRT monitor? just mapping

it's "podium.dds" file .

and it's on the beginning(end) of the pits

Last edited by BranislavS, Sun 29 Apr 2007, 03:15.

now have the same problem ,just connected second monitor anf no AA ,but when I chance my resolution in LFS to 16b i got AA ,,may I help ,,,I try to figure what was the problem

reinstal properly 7.4 and works fine

Last edited by BranislavS, Mon 23 Apr 2007, 01:47.

have same problem with my x1950xtx with original and 7.3catalist ,had only AA and AF when I chance the setings (in Catalist) ,,in 7.4 catalist is all OK . with my old GPUs x1800xt and x800xt had no poblems with catalist from 6.1 to 7.2

Quote from Thorvertonian :

Can't load this, everytime I try just get an error "Floating point division by zero" error

This is version 2.02

Same problem ,can't run Spectator anyone some ideas?

edited: if I run it in 256color mode it's run ,but all is only black and white and isn't showing the whole

Last edited by BranislavS, Mon 22 Jan 2007, 18:15.