Thanks for the Aegio update! running now a 0.6A1 server

Yay what a great improvement, now I can install a second LFS to join z28 or z34 servers... GREAT.

Oh, just saw cargame has problems with airio... great, cant upgrade the server to 0.6A1 now and ppl cant join anymore the z34 server... great great great.

Edit: just made some speed hump tests: if you go faster, the car shakes less... made a test lay with 10 speed humps, about 1 car gap between the humps. At 50kmh the car is shaking badly (like in RL), but at 120 kmh almost no shaking??

Last edited by SJB, Sat, 11 Jun 2011 01:19.

Airio support thread: http://www.lfsforum.net/showthread.php?t=52368

Regards, SJB

Just started developing with pyinsim yesterday, its great!

How can I get the username of someone who wrote something? I got the mso.UCID and mso.PLID but how does the query for the username looks like?

Regards, SJB

No

PySerial is already installed (was a bit tricky on win7 x64: http://www.python-forum.org/py ... opic.php?f=15&t=21763 ) and Arduino is connected to COM4 (Arduino Code upload on COM4 works)-

Edit: tried the Software from PWILLARD too, but it has 1-2 seconds lag and the rpm bar (first green LED) starts at 6500 rpm O_o

Regards, SJB

Last edited by SJB, Sun, 5 Jun 2011 20:08.

Cant run it, every time I press START after enabling USB:

Another question:

Quote :

const int SRCLK_PIN = 7;
const int RCLK_PIN = 4;
const int SER_PIN = 2;

SER = Serial data input = PIN13 at 595

But SRCLK and RCLK? Which is the "Shift register clock pin" (PIN 11 at 595) and which the "Storage register clock pin (latch)" (PIN 12 at 595)?
Edit: RCLK = "Storage register clock pin (latch)" (PIN 12 at 595) - looked at the code of a ShiftOut Example and your UtilityFunctions

But Arduino is still receiving nothing

Regards, SJB

Last edited by SJB, Tue, 31 May 2011 22:55.

Maybe the cruise servers got z30 and above (http://www.lfsforum.net/showthread.php?t=74012) and you only Z28?

Any possibility to realize a wrong way check on the new X tracks of Z30?

Regards, SJB

Quote from Bose321 :

As it's a test patch, and not a stable release like Z25 and Z28 I assume.

Just for the ppl that they can see something is going on - last news there is from january^^

Why dont you publish this in the news section on lfs.net as test patch???

Try to start LFSShifterV5.6b.exe first and then LFS.exe

Go to a server (or open a singleplayer game) and join the track with a car

Hit then retry and OK at LFSShifter


Edit: I made a "real" sport config for xrt now:

Quote :

[THROTTLE CONFIG]
NextGearSensitivity=85
NextGearSensitivity2=90
NextGearSensitivity3=95
FlooredGearSensitivityLow=95
FlooredGearSensitivityHigh=96
[RPM CONFIG]
NextGearRPMSensitivity=6900
NextGearRPMSensitivity2=6950
NextGearRPMSensitivity3=7000
FlooredRPMSensitivityLow=0
FlooredRPMSensitivityHigh=5000
TooLowRPM=4500
HighestRPM=7241
[OTHER]
ShiftTime=150
KickdownToFirst=1
SpeedForFirstGear=60
NoShiftNextGearTime=800
WaitAfterFloorShiftsLow=100
WaitAfterFloorShiftsHigh=1200
[KICKDOWN]
kick2=4000
kick3L=0
kick3H=5000
kick4L=2800
kick4H=5000
kick5L=2500
kick5H=5000

- Shifts up with 85% throttle @6900rpm and with 100% throttle @7241rpm (default sport config shifts up @5000rpm with 50% throttle - it nerves especially in corners...)
- Shifts down for better acceleration at kick down under 5000rpm (default sport config shifts down under 4000rpm - no acceleration at corner exit after it shifted up in the corner...)

Dont forget to switch from economic to sport - LFSShifter starts with economic config

Edit2: Dont forget to change CarGears= from 4 to 5 in XRT_shiftercfg.ini

Regards, SJB

Last edited by SJB, Tue, 5 Apr 2011 12:29.

Thank you very much

if a limad does "!cars road" airio doenst do "/cars=road" - it does "/cars=" instead

Last edited by SJB, Fri, 1 Apr 2011 00:13.

Quote :

...on the server by driver.

@cargame: server based, lfsw counts all together...

You could show the fuel comsumption with the data you see when you set your fuel in % before you join a race e.g. "1,3% per lap" and hardcode the values - not the real fuel consumption but atleast average values

For those who want to see "wooohooo I burned 46liters fuel while driving 200km today on here" is it accurate enough

Regards, SJB

If someone is connecting and you try to enter a server command (e.g. /laps): the server ignores it. Maybe its something similar when Airio tries to send /cars or /laps to the server.

I will watch it and try to provide you more info how it happens

hahahahahaha so funny guys

Rotation works good, only if something is manually changed it bugs around sometimes...


Yesterday I was on the server and a teammate set "!len 5" and "!cars BF1" on KY1, on the next track it changed cars back to TBO, but laps were still set to 5 (look at rotation, all tracks are loaded with less than 5 laps).

And sometimes (rare) if I do e.g. "/cars=FOX" on a track, it loads the next track with FOX enabled too (all tracks has set the car option).

Regards, SJB

Last edited by SJB, Thu, 10 Mar 2011 09:45.

@M.M.L.: I think its only possible to set it for all races to grid by random/reverse/pb/totalpoints and not first race grid by x, 2nd race grid by y, 3rd race grid by z

Just noticed a little bug

My Teammate set the race to 5 laps with "!len 5" but at other tracks of the rotation it keeps the 5 laps and not changes to 2laps like its set on rotation for e.g. BL1, 3 tracks later it has still 5laps, now I set it back to /laps=2 and did !rld in case if it saved it temporarily for the tracks

A similar bug happens with the cars sometimes (rare): I enable GTR on AS2 and on next track e.g. BL1 should be TBOs, but sometimes it keeps the GTR cars.

Regards, SJB

Okay, I set it back to 0 now

I thought for erasing all stats is that option: DaysKeepStats=600

Do you mean how to include e.g. http://www.lfsworld.net/hoststatus/?h=![AMG]+GTR+MotorSport into your page?


And if you want to have the Iframe reloaded every 60seconds:

Regards, SJB

I changed DaysTotal= from 0 to 30 yesterday (and did !aini), but nothing happened at server midnight

I would like the !total to be monthly based, old points you received for racing should be deleted after 30 days.
Some new racers are loosing attraction when they see ppl at !total with 15k points and how many points they get for one race

I am 15th at !total with 6k points

Regards, SJB

Thank you very much for the update!

My better first laps are now saved again

Regards, SJB

Quote from EQ Worry :

To achieve the special manipulation you require you have two options:

Thank you very much for the explanation

Quote from EQ Worry :

I saw some PBs not stored.

At the moment our Airio is saving PBs, but it ignores the first lap:
We did a 2 laps race on our server: in lap 1 I did 1:36.xx and it wasnt saved - in lap 2 I missed the brake point and lost time in the sand -> 1:38.xx in lap 2 and airio wrote "new server pb 1:38.xx" and 1:38.xx appeared in !top - but my first lap was faster

Airio 2.5.1 seems to ignore the first lap

Regards, SJB

Last edited by SJB, Sun, 27 Feb 2011 02:14.

I hope 2.5.2 has colors again in !msg command

What about the questions in post #1840 and #1841?

Regards, SJB