If anyone could give it a test that would be great!
This can be controlled by 5 lines in the cfg.txt file :
OutGauge Mode 0 :0-off 1-driving 2-driving+replay
OutGauge Delay 1 :minimum delay between packets (100ths of a sec)
OutGauge IP 0.0.0.0 :IP address to send the UDP packet
OutGauge Port 0 :IP port
OutGauge ID 0 :if not zero, adds an identifier to the packet
Each update sends the following UDP packet :
unsigned int Time; // time in milliseconds (to check order)
char Car[4]; // Car name
word Flags; // Combination of OG_FLAGS, see below
byte Gear; // Reverse:0, Neutral:1, First:2...
byte SpareB;
float Speed; // M/S
float RPM; // RPM
float Turbo; // BAR
float EngTemp; // C
float Fuel; // 0 to 1
float OilPress; // BAR
float Spare1;
float Spare2;
float Spare3;
float Throttle; // 0 to 1
float Brake; // 0 to 1
float Clutch; // 0 to 1
char Display1[16]; // Usually Fuel
char Display2[16]; // Usually Settings
int ID; // (optional ID - if specified in cfg.txt)
#define OG_SHIFTLIGHT 1
#define OG_FULLBEAM 2
#define OG_HANDBRAKE 4
#define OG_PITSPEED 8
#define OG_TC 16
#define OG_HEADLIGHTS 32
#define OG_SIGNAL_L 64
#define OG_SIGNAL_R 128
#define OG_REDLINE 256
#define OG_OILWARN 512
#define OG_1 1024
#define OG_2 2048
#define OG_3 4096
#define OG_4 8192
#define OG_KM 16384
#define OG_BAR 32768
. I just hope that one one else around here will code for it ... I don't have that much skill.
so if you have any questions, I will be happy to help.
