The online racing simulator
Virtual LFS Dashboard
1
345
(116 posts, started )
#1 - DavidTiger
Virtual LFS Dashboard
Thanks to Erazotropa for providing his sources for me to continue development on this Smile

Virtual LFS Dashboard V0.2.3

The Virtual Dashboard for Live for Speed!

Works with OutGauge, Can be used on you Primary or Secondary monitor.
OR you can use it over a LAN on a second Laptop/PC!
Note: LAN users set the outguage delay to 5 to fix lags on the dials Smile

Various screen resolutions available!!

Whats New in v0.2.3?[/B]
* Updated for Z25 and above *
* Variable Max Dial RPM for each car *
* New Dashboard Lights *
* Keyboard (NumLock, ScrollLock) LED Turn Signals *
* Turn signal Click Sounds *
* Top Speed Needle (See your top speed in each car) *
* Shift Up Indicator will work in all cars, Yes ALL cars (if enabled) *
* New "Shift Up" Voice for all cars *



Latest Downloads:
Official Link: VLFSDash v0.2.3
Official Source: VLFSDash Source v0.2.3
Layout 1024x768: VLFSDash 1024x768 v0.2.3
Layout Changed: VLFSDash Layout v0.2.3
______________________________
(Please Don't Post Mirrors, Try To Keep All Downloads To This Post)
(PM Me Your Mirror Downloads, And I Will Add Them)
#2 - logitekg25
yay

sadly when i get my 2 moniters there will be no room for a vga cord, so i will have to lose the dash
#3 - DavidTiger
Oh I was the same until I found an old s-video cable
19" TV (main monitor via DVI) + 26" TV (VGA Port) + Portable CRT TV (S-video)

Quality aint that good from s-video but its onlt used for the Dash
#4 - Neto_r
any screenshot or picture ?
#5 - logitekg25
the cardi put in has a hdmi, and 2 dvi, and there is no room for any other card....i do have the onboard with a hdmi and a vga but it wont work once i put in another card

were hi-jacking the thread guys
#6 - DavidTiger
Quote from Neto_r :any screenshot or picture ?

Screenshots added to the 1st post

Note: I got them from the old thread, just incase you thought I took them (with FXR)
OT: Try to keep Chatter to a minimum Keeps the topic on topic unlike the old thread
-
(Naruto06) DELETED by Naruto06
#7 - Naruto06
just a quick thought...are you ever going to change the version :P its been at 0.2.3 for a while now
#8 - KWAK7
Hi, just a question. Would this work with a digital photoframe? I have a Philips one with USB input. Anyone know? I can get more info if you need it. Cheers.
#9 - Jadran
Quote from KWAK7 :Hi, just a question. Would this work with a digital photoframe? I have a Philips one with USB input. Anyone know? I can get more info if you need it. Cheers.

I have samsung photoframe with USB input and work nice
#10 - Danny LFS
No version for 1440x900? Awww....

Guess I'll have to stick to 1280x1024.
#11 - Xenix74
thx for update this great app
#12 - Logicalx
as nice as this is, what is the actualy point in it ?
#13 - Flame CZE
Quote from Logicalx :as nice as this is, what is the actualy point in it ?

It's stated in the 1st post - you can use it as gauges on your second monitor.
#14 - Macist
I play z28
I run vlfsd 0.2.3 (800x600)

1. I changed lfs config.
2. set port on LFSDash
3. run lfs, type /insim 4000
4. got error:
InSim: first byte in packet does not match size
InSim: packet received before ISI packet

Is it not acceptable for z28 yet?
#15 - kuplakuski6996
Hi. I have one question.
How to set propely VLFS dash to another computer through LAN?
I've setted in CFG.TXT port. but what I have to do then?
I need a good directions
And I really want do make this work.
#16 - kazmer
DavidTiger, could you make a 800x480 version of the VLFSDash?
Thx.
#17 - AnyBodyKilla
Quote from kuplakuski6996 :Hi. I have one question.
How to set propely VLFS dash to another computer through LAN?
I've setted in CFG.TXT port. but what I have to do then?
I need a good directions
And I really want do make this work.

yea i could use some more info in this too
#18 - DavidTiger
Quote from Macist :I play z28
I run vlfsd 0.2.3 (800x600)

1. I changed lfs config.
2. set port on LFSDash
3. run lfs, type /insim 4000
4. got error:
InSim: first byte in packet does not match size
InSim: packet received before ISI packet

Is it not acceptable for z28 yet?

Uses Outgauge not Insim make sure the port set in VLFSDash is the same as the one for OUTGAUGE in the lfs config

Quote from kuplakuski6996 :Hi. I have one question.
How to set propely VLFS dash to another computer through LAN?
I've setted in CFG.TXT port. but what I have to do then?
I need a good directions
And I really want do make this work.

Set your port in VLFSDash, lfs config (with internal LAN IP of the second PC)
Make sure you have the ports chosen opened, via firewall andor router settings... and should work like normal

Quote from kazmer :DavidTiger, could you make a 800x480 version of the VLFSDash?
Thx.

Eventually I'll make multiple resolutions, but just now I am too busy with other things
#19 - kazmer
Quote from DavidTiger :
Eventually I'll make multiple resolutions, but just now I am too busy with other things

Ok thx
#20 - Macist
Quote from DavidTiger :Uses Outgauge not Insim make sure the port set in VLFSDash is the same as the one for OUTGAUGE in the lfs config

Already did all that.
Didn't helped till i restarted my pc
#21 - pik_d
Quote from Flame CZE :It's stated in the 1st post - you can use it as gauges on your second monitor.

Aren't there already gauges on your 1st monitor? I have to agree with Logicalx, it looks nice but I hardly see the point for a duplicate dashboard that's not where you're looking (forward, at your main monitor) and not as familiar as a regular dash like in LFS.
#22 - Feffe85
Quote from pik_d :Aren't there already gauges on your 1st monitor? I have to agree with Logicalx, it looks nice but I hardly see the point for a duplicate dashboard that's not where you're looking (forward, at your main monitor) and not as familiar as a regular dash like in LFS.

Yeah cause NO ONE has EVER had a smaller monitor than the 1st one, right?

i used this on my LG X110, and i just put the smaller comp/screen infront of my 22" and behind my keyboard.. worked like a charm.. until i wanted to use RevLimiter instead xD
#23 - senn
Virtual Gauges on, problem solved.
#24 - super_hoops1967
is there any chance of running this on a pda or iphone?
#25 - logitekg25
i would have to say yes...you might/probably will have to jail-break it though to get it to display when you want
1
345

Virtual LFS Dashboard
(116 posts, started )
FGED GREDG RDFGDR GSFDG