As far as i know, it can be resumed simply:
Grip raises with load, up to a point. Grip/load is not a linear relationship
Once you overload a tire, it loses most of it's grip and is basically useless.
THIS is the only reason to get wider tires in fact.
In theory, the narrower the tire, the more pressure is applied on the same
square inch, so the more the tire 'digs' to get grip. This is why narrow tires
are preffereable in snow, sand, or any loose surface where the tires NEED
to dig to find a stable surface to apply force to.
A wider tire will tend to float on these surfaces and have a hard tire finding
any grip. Also, wider tires will slow you down because of the increased drag
and the lower pressure per in² means you use less of the potential grip (you
might not be taking advantage of optimal grip).
The only valid reason, as far
as i know,
to use wider tires is too spread the weight as to prevent overloading
the tires at the limit. This is because as you increase load on a tire, the grip it
can generate also increases (i.e: if you put more weight on the tire, it
can grip more),
up to a point (optimal) where grip just falls off and the
tire slides (put simply, the tire overheats). The only way to prevent this
'overheating' is to increase the contact surface, which lowers the pressure
per in² (im not using PSI as not to create confusion btw) giving the tire a
higher 'load capacity' (im vulgarizing for the sake of comprehension here).
Another factor, although related, is tire deformation, as a tire approaches it's
optimal zone, the tire starts deforming and overloading it means it deforms
beyond it's intended shape which also reduces the grip potential of your
tire, not to mention it will be harder to control, and possibly dangerous.
You also risk blowing out the tire, which we all know, will also decrease grip
So, ideally, you want the narrowest possible tires that will NOT 'overheat'
when you push them at their/your limit. Wider is NOT always better
It also costs more money
I'm not sure, but i think this is what they refer to as load sensitivity.
Ok, so i can't keep it simple...lol