It got tupe type chassis by cusco, a 1600cc NA engine , 250ps, FF
CCC 1600cc is a very open serise, the car & engine must be made in China,m <1600cc, can't changh the drive layout, no Charger, the cylinder block must be stock, can't changh the
wheelbase, than you can changh any other things.
Because some teams is poor, some is rich, so the strength of them is very far. This Polo will see the black maker in first 5 lap.
An upcoming racing series in China? Then how about some info? Is it like a Chinese version of the Polo Cup i.e. nothing can be changed except tyre pressure? Or is it more a Chinese touring car championship where different manufacturers produce cars according to a certain ruleset?
this is a Touring car championship in China, call "China Circut Championship"
Polo, Geely, TIIDA, KIA, Hyundai, 206, 307, Citroën, Focus, Auccord(Chinese version), sunny, Brilliance & Lancer are in this race.
There are 2 group(exclude Formula race) in this Championship: 1.6L & 2.0L
2.0L have more rule on tune & parts changh, 1.6L can changh many things. This Polo, someone said it is a FF version of DTM car, but in the slowest team in 1.6L, their car have very little changh, lesser than the Group N race car, so you can see the Polo can see the black maker in first 5 lap.
2.0L & 1.6L will not race together. in some shorter track(e.g. Beijing), the best lap or qualfily lap time 1.6L car can faster than 2.0L. & the Polo's best lap is faster than the Carrera cup Asia's Group B driver in Beijing.
Another "Super Touring" CCC race car-- Nissan TIIDA Tuned by Nismo will show in this year, someone said it will be a FF version of Super GT car.
How can a Polo be an FF version of a DTM car, when VW doesn't make a DTM car, Audi has an A4 used for that, which just looks simmilar to the A4 and is actually a tube spaceframe chassis fith carbon fibre/fiberglass parts over the top and with a 4,2 litre V8 (and RWD)?
The top teams have professional drivers(like VW & Nismo CCC racing & the Geely team before it leave), but there are also some club racers there
I'll make a list of the CCC teams & car after the first race this years.
Honda Auccord of Hankook Team LF (2000cc Class)
Ford Focus of Chang'an Ford Racing (2000cc Class)
The Orange Car--the third driver
Peugeot 307 4dr version of China Dragon Racing (2000cc Class)
Peugeot 206 of Dongfeng Peugeot China Dragon Racing (1600cc Class)
Honda Auccord of TSB Racing (2000cc Class)
Kia Cerato of Dongfeng Yueda Kia 778 Autosports (1600cc & 2000cc Class)
Hyundai Elantra of Beijing Hyundai Freely Racing (1600cc Class)
Nissan TIIDA of Dongfeng Nissan Ghia Sports Tuned by NISMO & Renault Sport (1600cc Class)
VW Polo of Shanhai VW 333 Racing builded by CUSCO (1600cc Class)
HA/MA New 323 of HA/MA Winson Racing (1600cc Class)
HA/MA 3 of HA/MA Winson Racing (2000cc Class)
Toyota Collora of Loong Wah Racing (2000cc Class)
Toyota Camry of Loong Wah Racing (2000cc Class)
NISSAN (Sunny?) of Lo's Racing Powered by 778 Autosports (2000cc Class)
Citroën Fukang of Dongfeng Citroën Hai dian (Driving school) Racing (1600cc Class)
Geely Freedom Cruiser of Weihao Racing (1600cc Class)
Geely Freedom Cruiser of Dreams Racing Powered by Weihao Racing (1600cc Class)
VW Polo of Weihao Racing borrowed from SVW 333 Racing (1600cc Class)
Brilliance Jinjie of Brilliance Wave Racing (2000cc Class)
T-Sun Racing use Citroën Fukang, Top Speed Racing use GM, but they haven't show in 2007
Thx for corrections^.^
There are many parts of the Camry designed by Themselves
& Camry was race in Aus
& 333 had rebuild the chassis of the Polo
FASC designed to cancle 1600cc class, replaced by Super 2000
All of them are real....
The HA/MA 3/ New 323, HA/MA is the name of their brand now, but it just for short before.
the full name is Hainan Mazad. the contract of them make many space to Hainan Motors.
So, after their cooperation, the contract allow Hainan Motors use the Mazad car which they had made to be the based of their new car.
Because Hainan Mazad is more famous than Hainan Motors, so the changh their name to "HA/MA".
2000cc class is base on Group N, but have some changh to allow Sequential gear box (should +30kg), engine parts changh & aero parts.
1600cc is a unlimt class, the rule just said you should use the car made in China, <1600cc, no charge, the engine cylinder block must be stock, & can't changh the drive layout. So you can see some tupe type chassis race car(like this Polo).
Academically, Carbon Fiber chassis is also allowed
The 333 Racing said, the cost of their Polo is ¥3330000 RMB. :P