Funniest is 20 AI's in the UF1 on SO1r (South City Classic Rev), just watch how well they take the chicane NOT!!!

The AI are at their worst in the XRG, they can't drive it for toffee!! Stick 20 AI in the XRG on FE3r (Fern Bay Gold rev), the first corner is a beaut!! First time not too bad, every other time round utter mayhem!

Try a field of 20 AI one in each type of car, sit in the slowest (UF1) and watch the chaos around you, mostly caused by the UF1.

A field of each road car 2 AI in each type or a field of track cars is worth watching also.

Logitech, please fix my G25 soon :banghead:

Another "sweet spot" for the AI is with the FO8 on Westhill reversed. They all go off the track in a corner about half-way through

Oh, and don't forget to test SO5 with mandatory pit-stop.

Quote from TAYLOR-MANIA :

Things to do when your'e G25 is broken...

try to fix it?

Not when it's still under manufacturer's warranty!!

Quote from Gekkibi :

Oh, and don't forget to test SO5 with mandatory pit-stop.

Any particular car?

Quote from Karoti :

Any particular car?

Happened when I used FXO. Full grid, of course.

Or try this one:
Put les powerfull cars first and more power full ones behind and look at the race start in KY1
Or make them pit...
I know it's stupid but it make me laught

Do AI's on the oval. Particuarly FO8s

Upload a video on youtube plz!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Quote from ProDemoDrifter :

Upload a video on youtube plz!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

That would be utterly pointless. Too many crappy videos on youtube already.

Quote from TAYLOR-MANIA :

Ah i see, so atleast you can get it fixed then...

I actually kind of broke my pedals the other day when I took the pedals off to place some washers underneath the clutch & brake... I didn't realize how much I tightened them up & when I came to undo them again, because I put it back upside down (wider end at the top), i rounded off the screw head!!

Only thing I can think of is to weld another screw head ontop and use that to get them out! Bugger

No further questions M'lud!

Hmm, what an interesting miss-use of your/you're. I haven't seen that one yet, and I have been skulking around the internet for near on 10 years.

Bravo! Queen's English and all that.

Quote from TAYLOR-MANIA :

Ah i see, so atleast you can get it fixed then...

I actually kind of broke my pedals the other day when I took the pedals off to place some washers underneath the clutch & brake... I didn't realize how much I tightened them up & when I came to undo them again, because I put it back upside down (wider end at the top), i rounded off the screw head!!

Only thing I can think of is to weld another screw head ontop and use that to get them out! Bugger

What you do, if you can reach the area, is to take a drill bit the same width as the screw itself. Drill through the head, remove the head and then use some pliers to get the screw out.
If you can reach it, otherwise a superglued nut to the head of the screw will work fine

Quote from MRSisson :

Hmm, what an interesting miss-use of your/you're. I haven't seen that one yet, and I have been skulking around the internet for near on 10 years.

Bravo! Queen's English and all that.

I agree, realised as soon as I posted, but you can't edit your Title, don't know where the 'e came from, damn!!

Things to do when your G25 breaks:
Go drive your car and practice your donuts and drifting skillz while you wait to get your G25 back If your back garden is not big enough, try the M6. My mother used the M6 and she had a caravan on the back of her car unfortunately she ended up rolling the car. the caravan was ok though

Put some AI on SO sprint 2. They can't seem to take the right line.

Go to random server and put couple of AI's into the grid.

Quote from ProDemoDrifter :

Upload a video on youtube plz!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think there are some mad men in an asylum some where missing some exclamation marks . . . .

Say what? . . . . . Your what? . . . . . Oh, you are in an asylum. Well done, great. Thanks for sharing . . . . . . Erm, where's the nearest exit again?

Does anyone know where i can get a hexta screw driver in the uk. Any shops? Funniest put a grid of 10 uf1's and 10 bf1's.

Quote from Luke.S :

Does anyone know where i can get a hexta screw driver in the uk..

Err... Probably any elecrical / tool shop.

k thx i'll have a look in B&Q