The online racing simulator
Searching in All forums
(14 results)
gigi91430ita
S2 licensed
It doesn't work
Now when the car is stopped it doesn't bounce between 1st and 2nd, but when accelerating with any value between 1% and 94% it upshifts at the correct point, but immediately after it downsifts to the previous gear (the debug gui doesn't tell anything during the downshift, while upshifting it says upshift 1, uphshift 3...).
If I fully accelerate it works correctly, changing gears near the redline.

There must be something stupid, like an "if" with a "<" instead of a ">"...
gigi91430ita
S2 licensed
Yep, the bug continues...
I've noticed the bouncing between 1st and 2nd is present only if the throttle is >0% (and when the engine is idling is between 4-6%), if you are going in 2nd and the throttle is completely off, it doesn't bounce between gears, but if you gire just 1% of throttle it starts meshing gears randomly..
gigi91430ita
S2 licensed
I've deleted config folder and run it as admin, nothing changes...

[THROTTLE CONFIG]
NextGearSensitivity=50
NextGearSensitivity2=70
NextGearSensitivity3=95
LightKickSensitivity=60
FlooredGearSensitivityLow=75
FlooredGearSensitivityHigh=96
[RPM CONFIG]
NextGearRPMSensitivity=1950
NextGearRPMSensitivity2=3500
NextGearRPMSensitivity3=5065
LightKickRPMSensitivity=2300
FlooredRPMSensitivityLow=0
FlooredRPMSensitivityHigh=4000
TooLowRPM=1200
HighestRPM=6800
[OTHER]
CarGears=5
ShiftTime=150
SpeedForFirstGear=20
NoShiftNextGearTime=800
WaitAfterFloorShiftsLow=500
WaitAfterFloorShiftsHigh=1200
[KICKDOWN]
kick2=3000
kick3L=0
kick3H=4000
kick4L=2800
kick4H=4000
kick5L=2500
kick5H=4000

This is an example of config file...
If the program is coded in a "c" like language maybe I can help you with the debug
Last edited by gigi91430ita, .
gigi91430ita
S2 licensed
Here you are

http://www.youtube.com/watch?v=jwzow4yr1J4

(watch it in fullscreen full hd if you can)
gigi91430ita
S2 licensed
If the debug gui window were resizeable, it would be easier to read...

However throttle extra rpm shows a value only when I fully press the throttle, and is something like 2133 in first gear, it doesn't vary.

Since the windows is so small i cant read clearly the gear mode, but it should be "shiftup" when it passes from first to second, and "downshift1" when it goes back to 1st.

Why don't you compile a test version with all the variables of our program in the debug gui, so we can detect where the problem is?
gigi91430ita
S2 licensed
Sorry Man,
it has the same bug as you first "dynamic" version.

When I start it it bounces between 1st and 2nd, if I press a bit of throttle it puts 1st, 2nd, 3rd, 4th and 5th in few seconds, if I accelerate a bit more it changes gears randomly and if I fully accelerate it downshifts using kickdown.

If I fully accelerate from a standstill it doesn't change to 2nd gear until I release a bit the throttle...

I'm using LFS 0.6E fresh installed with your AT setups on Windows 8 64bit.

I also tried it on a previous 0.6B but it has the same problem...
gigi91430ita
S2 licensed
I understand if your parents don't want to use their credit card on the web, mine too. Here in Italy I solved the problem buying a "rechargeable" credit card, you buy it and put in it 30 euros, then you use it to buy what you want in the web... even if someone is stealing your card, you might lose not more than the money you put there...
Try to find if there is something similar in your country
One you have one, you can use it whenever you want to buy something in internet.
gigi91430ita
S2 licensed
What about adding an odometer in all road cars, like in RAC?

Then I noticed that ABS and TCS don't work below a certain speed (in TCS you can adjust that speed), while in real cars usually these systems can work even at really low speeds (4-5 Km/h). Cold you adjust these values for both systems?
Last edited by gigi91430ita, .
gigi91430ita
S2 licensed
Oh my Goooood!!!! That's a beautiful piece of news! I can't wait! soooo happy! Good job!
gigi91430ita
S2 licensed
Very nice job.. congrats..
gigi91430ita
S2 licensed
How can I compile it?
gigi91430ita
S2 licensed
I have the same problem about the clutch, but I solved it using DxTweak 2, setting cluctch calibration as:
Min: -80; Center: 90; Max: 255.
I don't know any solutions about the wheel calibration, when I use LFS i set in Logitech Profier 720° of rotation, so there is a 1:1 mapping with the game and I never had problems. Try and tell us..
gigi91430ita
S2 licensed
I only said that they could tell us what the're doing. like "we are tryng to solve a bug with the physics" "we solved a compatibility bug with some video cards", something that lets us now that they are alive.
I'm sure they're working a lot and I appreciate this, but well, I know tha phylosophy of the team so amen..
development and communication
gigi91430ita
S2 licensed
Hello everyone,
I'm not really a very good "LFS forum" user, because I don't read it every day and I have never posted here, but generally at least once a week I try to read some threads just to stay up-to-date.
I see that there are a lot of people (me too, obviusly) asking for the VW Scirocco or for general news about the development of our favourite game.
I understand that only 3 developers with a huge project like LFS makes them very busy, but why don't write something like a weekly newsletter telling about the progress in developing patches or updates? People should complain less and maybe could even give some suggestions..
What do you think?

(maybe this idea isn't so new, but I have never read anything similar, so this is my suggestion. If someone already answered to a similar question please tell me)
FGED GREDG RDFGDR GSFDG