Quote from MonkOnHotTinRoof :

Interesting...
But wouldn't nohup command also do the trick?

That looks so much simpler than my way...

I loged in as another user and used sudo to start LFSLapper with my lfshost user and ended line with & to run in back, then I could quit putty and LFSLapper was still running

Hmm, another mono question, hehe

How to start LFSLapper and keep it running? I use Putty to log on to the server, but when I have started LFSLapper and closes Putty I also close LFSLapper?

After I got mono to work with adding some lib's I now reuploaded the LFSLapper.exe and now it works, no more assembly error

Thank you so much for the help!

Quote from MonkOnHotTinRoof :

XWindows are not needed. From where did you run mono now ? Did you check if mono can be run from everywhere ? Then go to LFSLapper/bin directory and run it: mono ./LFSLapper.exe ../cfg/LFSLapper.cfg.

Yes, now I can run mono from anywhere.

If I type:

I get:

If I only type "mono" I get:

ok, I was missing a lib libglib2.0-0 - The GLib library of C routines
thats why it wouldnt start... it was not installed when I installed mono.

But now when I do: mono LFSLapper.exe LFSLapper.cfg I get:



Can it be that I dont run xwindow, I run only text mode? Is xwin needed?

Last edited by Noxi, Mon 29 May 2006, 18:58.

Hmm... did something go wrong with my installation of mono...?

Quote from MonkOnHotTinRoof :

Did you install it as root? I think if you install mono as root, the paths are not modified and you have to do it manually. I always install mono as normal user somewhere into my home directory.
I use same mono installer and Debian distro, so there should be no problem with that.

I installed mono as LFSHost user. Even if I place myself in the /mono-1.1.15/bin dir and run mono from there with the path to LFSLapper, I get the
I hate being a noob... hehe. Thank you all for your help

Edit:
I installed it again as another user, in home/user/mono dir.. same thing.

Should I get a respons from mono when I just type "mono". All I get is "mono: command not found".

Is it possible to run both mono and wine at the same time or can that couse a conflict...?

Last edited by Noxi, Mon 29 May 2006, 11:25.

I downloaded and installled mono Linux Installer for x86 (All distributions)
from http://www.mono-project.com/Downloads

but I get "command not found" when trying "mono LFSLapper.exe LFSLapper.cfg"

I use Debian and Im not sure that mono release works with Debian?

I have seached but have not found any other installers that are for Debian...

If anyone that also uses Debian know if that is the mono to go with, that would be helpfull.

How do I start LFSLapper on linux with wine? I have the LFS server running but when I try start Lapper with "wine LFSLapper.exe LFSLapper.cfg" I get
Im very noob on wine and followed the powie.de guide to get it going.

I had a friend login to my server throug internet and that went well.

But it does not show on the serverlist (its private if you try find it) and not any statistics are sent to LFSWorld...?

Thanks, yea I can connect on my local network, have not tried to connect from an "outside" computer. I would guess its not showing up on the hostlist, as the stats to LFSWorld is not working?

I reinstalled my servers os, before that my server send information to LFSworld so stats got updated and all, but now when I reinstalled it nothing happens on LFSWorld.

I think I have all the ports open and forwarded... what can I have missed.. ?

Please any ideas would be great help

Server name is NoxiNet and IP is 81.227.122.210

Last edited by Noxi, Fri 26 May 2006, 14:03.

Yes

When I upload your file with binary I get results!

But how do I rebuild me LFSLapper with this.BinaryMode = false;?

And how do I change the layout of the resultspage?

We are getting closer, hehe

edit: I just looked at the how-to-build.txt I will try that.

But the layout thing?

Last edited by Noxi, Sun 21 May 2006, 00:55.

I now run with your DB.txt but same thing...

edit: I run my server on winxp

I use Debian Linux the latest release... the server shouldnt be a problem.

edit: with Apache 2.0.54-5

Last edited by Noxi, Sat 20 May 2006, 21:11.

Also... is there a way to edit the layout of the result page?

Do I need a special CGI editor so I dont mess up the code?

Thanks

Im having problem with WebStats... I dont get any resaults on the list...

I have my PB.txt and DriftPB.txt in the cgi-bin.

http://www.noxinet.com/lfs/webstats.html

I have this in the PB.txt now for test:


Anyone know what I may have done wrong?

You can use a Gateway to run muliple InSim modules, I use RaceManager that has a few nice modules built in and lets you run others aswell.

http://silk.lfsnal.org/RaceManager.html

Just config LFSLapper to use the gateway port and password and you can run most InSim apps simultaniusly.

Thanks gwendoline!

@Alan_Bernardo
No you dont need to make thise files, they will be created when the first driver makes his first lap. This error you get is not the reson lfslapper dont start.

The problem I would guess is with InSim, somehow the port you are using for InSim is already used. When I config my LFS server with /insim 29999 in the config I get the same as you, the window closes without any errors. So I removed that from config and manualy start InSim from the chat in my driversseat with /insim 29999. Thats how I got it to work, dont know why the config dont work. GL

Quote from gwendoline :

All working very good for me.
Look our FTP report display at http://frhteam.jexiste.fr/lapperstat/lapperview/selpb.php

Very nice gwendoline! Wanna share that php code for the page?

yes you can run insim and lfslapper on demoserver

Quote from MonkOnHotTinRoof :

Are you trying to run more InSim applications at the same time ? It won't work (at least not without gateway).

Try running LFSLapper without other InSim applications at first. You can change insim port to some other number, if 29999 is already used (don't forget to change lfslapper.cfg Port line).

No I dont run any other InSim apps and I have tried change to other port numbers but same thing.

I cant get LFSLapper to work
I get the same as ekze posted in his screenshot. It is missing the "InSimInit : port 0, Product : DEMO Ver.0.5Q" stuff...

Quote from ekze :

Yes, i am using shortcut method. I start LFSLapper and it stays opened, but nothing happens...
http://liveforspeed.com.ru/images/lapper.jpg

Quote from MonkOnHotTinRoof :

When LFSLapper is started, you should get in LFS console following message:
InSimInit : port 0
Product : DEMO Ver.0.5Q

I use DediLink to start my server, with InSim local UDP port 29999 and InSim port 7777 (default) and all looks fine on the LFS server screen with InSim listening on 29999.

If I start my server without DediLink and then type /insim 29999 I get "InSim::Initialise : bind failed" Dont know why... and I get same when I try to start InSim from a LFS client via talk.
I have /insim 29999 in config.

I run the LFSLapper on the same machine as the LFS server.

If I try add debug it makes no differens.

Please, any help would be very nice, I realy like LFSLapper and want it on my server

Last edited by Noxi, Wed 26 Apr 2006, 18:06.