don't feed the noob...

Quote from eRaptor :

Here you go:

http://www.logitech.com/lang/images/0/14258.jpg
http://www.logitech.com/lang/images/0/14259.jpg
http://www.logitech.com/lang/images/0/14260.jpg

We'll split the prize...

last one doesn't work


btw, i'm sketching my new project for my G25... tip : follow your imagination... not other's

i'm waiting for the 7seg display software, Gegry1992

i don't know anything about programming... so...

cumpz everyone

what i wanted was the ANALOG GAUGES for rpm, speed, fuel and turbo...

but, well... i cant find a DIY... =/

you know what? i'm glad to help Gegry1992 project and everyone who's involved

i'm glad with the 8LED bar project that Gegry1992 posted. Definitly will be part of my cockpit project.

thanks for everything

my project has:
3 100Ohm resistor for Green LEDS -> so you get 2.5v on-LED
3 150Ohm resistor for Yellow LEDS -> so you get ~2.1v on-LED
2 180Ohm resistor for Red Leds -> so you get ~1.8v on-LED
even with 1.8v, the red leds lights up preaty good!

i don't think it can damage the lpt port, maybe it could but in a long term... but imagine how the data is tranfered to an lpt printer, i think the refresh rate is way faster than the Gegry1992 project.

man! if you have 3 lpt ports... you could do a 3 7seg display for speed

(just flashed in my mind )

Gegry1992, to make the 7seg display with shift indicator is simple...

each segment is one led, you just have to light up the leds to the number appear

then the last LED will be the Shift Light Indicator

i think it's easy

Quote from Gegry1992 :

Bingo if you wire D0-D6 to 7seg display i make a software for that
and D7 D8 rpm and limiter led

i was just thinking of that!!! use 7 LEDS to 7seg display, and the last one to Shift Light!
Something like this :


cumpz

Hi everyone.

So here are the pictures of my project

LEDs : (3 Green, 3Yellow, 2 Red)


how it should look...


Leds done


Leds + Resistors Done



Then just wire the LPT pins to LEDS and PLAY

cumpz

Quote from Gegry1992 :

Yes
i make that
and please send pictures from your "leds" to inspirating other players

i sure will ASAP

Edit: tested the new version (with led flashing) but it flashes too slowly could you make it flash faster? (from 50ms to 100ms)

Last edited by NPedro, Sun 28 Jun 2009, 16:33.

Problem Fixed!

Working perfectly

Problem was : wrong cable soldering on led board... i did the LPT schematics from the wiki page posted, but i "read" it wrong... the first 3 leds were allways ON... and when i got it connected, the other ones light up backwards... (from 8 to 5)

thanks for helping

Gegry1992, could you please put the "Shift Light on leds" in flashing mode? or make a menu that you could choose between "flashing mode" and "always on mode"? (like in the first one you did) i think it could be a good idea btw

thanks for everything

Quote from Gegry1992 :

You started installdriver.exe?

Yes

Quote from Gegry1992 :

try copy inpout32.dll to system32 folder

Done

Quote from Gegry1992 :

and what operating system do you use?

XP Pro + SP3 32bit

Last edited by NPedro, Sat 27 Jun 2009, 22:03.

Quote from Gegry1992 :

Pedro i wrote
try to change lpt mode to ECP+EPP

already done... =(

I'm using Windows XP SP3 32bit, and my onboard parallel port... is that a problem? =/

LED dash and cable -> complete

but sill not working

problem here...
not working... =( the software works fine, no port change needed...
the leds don't work... i'm trying using other IRQ configuration on my motherboard BIOS, but no success...

Quote from Gegry1992 :

Yes , i think its work, but i dont know the port i forgot

Wich port is it???

i already bought the stuff... LEDs, Resistors, etc... (i'll post the pictures when its done )

Quote from bingo87 :

Ok, thanx for the reply.
Then i'll have to wait untill there is a USB version.

Greetz.

usb version is far more complex than you think... so don't even try if you don't know how-to

Quote from bingo87 :

Is it possible to use this with a USB to LPT converter?

probabily not... because, normaly, the converter can't redirect all the 25 pins from the usb port... i think...

just a simple (2in1) question:

Resistors value (Ohm)?

LED specifications?

thanks in advance

I think we missed something...

when u turn on the engine... its like it tuns on by miracle...
should it have a start engine sound?? diferent on each car/truck??

it would be great i think...

another sugestion :
when the engine reaches the max RPM, it could "bounce" the RPM engine a litle, like NFSU2

sorry my english

congratultions LFS TEAM!:lfs: :eclipsee_

Last edited by NPedro, Tue 2 May 2006, 22:13.

Quote from ste_ :

last time i saw something like that my graphics card was in the process of dieing.

But it works fine in the other versions...

Quote from Pellick :

This happened to me once, I believe I just reinstalled the game instead of trying to fix the issue... But how about reinstalling/updating your graphics card driver?

i've installed the latest graphic card drives, reinstalled the game after that... but still like before...

(sorry my english)

Last edited by NPedro, Sun 30 Apr 2006, 11:02.

for me, the game works...but i cant see any letters, numbers..or else!
i've tried all languages, but i still cant see any word or numbers...
its that normal ??

Look Here :
http://img150.imageshack.us/img150/3457/lfss2au7ka.jpg
http://img150.imageshack.us/img150/6063/lfss2au20cj.jpg

i thank anyone how helps me

Last edited by NPedro, Sat 29 Apr 2006, 22:46.