The online racing simulator
Problem with Fanatec steering wheel and pedals
(6 posts, started , go to first unread)
#1 - TheDarkOne
Problem with Fanatec steering wheel and pedals
Hello my friends
I have a problem with a Fanatec DD pro and the CSL Elite V2 pedals - I can only calibrate either the pedals or the steering wheel, but never both together - any ideas?
#2 - cuni
Are you trying to calibrate with the Fanatec software?
If you are connecting via USB, download USBTreeView to see if there is any device that is being temporarily disconnected.
Provide more information so we can better understand your issue
#3 - Scawen
It may be you are selecting one of the devices, listed at top right of the controller options.

This has confused quite a few people. You should not select one of the devices, but instead allow all to be active.
#4 - TheDarkOne
I have to take a closer look at that...

I always had 2 devices to choose from - either the pedals or the wheel ... when one of them was activated the other was deactivated, so either the wheel or the pedals were always active, but never both at the same time
#5 - Scawen
I think you need to click "other controllers" then don't select one of them.

As soon as you select one of them, that is the only one it will use. If you don't select one, then axes and buttons from all of them will be available.
#6 - TheDarkOne
** Best answer **
OK, it worked... the error was mine - I overlooked the fact that you could scroll down the window to calibrate the axles
It took me about half an hour to find the right steering angle, but now everything works
Thanks...

btw: everything I wrote here was translated from German to English by Google Translate - I don't speak English nearly as well as I would like - so sorry for any strange wording

Problem with Fanatec steering wheel and pedals
(6 posts, started )
FGED GREDG RDFGDR GSFDG