huhu huhuHere's the trick:
In gauges.ini, look for [GEAR] section, at the bottom, set direction=2.
Look for [FONTGEAR] section now, or if there's none, paste this in your .ini & adjust the values to suit your gauges:
In gauges.ini, look for [GEAR] section, at the bottom, set direction=2.
Look for [FONTGEAR] section now, or if there's none, paste this in your .ini & adjust the values to suit your gauges:
[FONTGEAR]
POS_X=000.000
POS_Y=000.000
SCALE=1
FONTNAME=(choose a font from the ones you have)
FONTSIZE=(choose a size to suit)
FONTCOLOR=(use anagauge config.exe to get the color code)Your EK9 gauges are Awesome, but you make a mistake sizing and positioning the gauges between themselves... try that in the gauges.ini and tell me what you think... is based in a real EK9 cluster dimensions...
[MAIN]
GAUGES_Enabled=1
ValueAsPercentage=0
BACKROUND_Enabled=0
Backround_Behind=0
SPEED_Gauge_Enabled=1
SPEED_Needle_Enabled=1
RPM_Gauge_Enabled=1
RPM_Needle_Enabled=1
GEAR_Enabled=1
FUEL_Gauge_Enabled=1
FUEL_Needle_Enabled=1
TURBO_Gauge_Enabled=0
TURBO_Needle_Enabled=0
FUELWARNLIGHT_Enabled=1
SHIFTLIGHT_Enabled=1
PITLIGHT_Enabled=0
TRACTIONLIGHT_Enabled=0
*******************************
*******************************
[BACKROUND]
Pos_X=344.000000
Pos_Y=592.000000
Dim_X=0
Dim_Y=0
Width_Scale=-1
Height_Scale=-1
*******************************
*******************************
[SPEED]
Pos_X=449.000000
Pos_y=566.000000
Gauge_Dim_X=256.0
Gauge_Dim_Y=256.0
Needle_Dim_X=256.0
Needle_Dim_Y=256.0
Rot_X=128.0
Rot_Y=128.0
Width_Scale=1
Height_Scale=1
min_value=0.0
max_value=200.0
min_angel=120.0
max_angel=-120.0
direction=4
typ=1
*******************************
*******************************
[RPM]
Pos_X=219.000000
Pos_Y=609.000000
Gauge_Dim_X=256.0
Gauge_Dim_Y=256.0
Needle_Dim_X=256.0
Needle_Dim_Y=256.0
Rot_X=128.0
Rot_Y=128.0
Width_Scale=0.83
Height_Scale=0.83
min_value=0.0
max_value=10000.0
min_angle=120.0
max_angle=-120.0
direction=1
*******************************
*******************************
[GEAR]
Pos_X=284.000000
Pos_y=592.000000
Dim_X=256.0
Dim_Y=256.0
Rot_X=128.0
Rot_Y=128.0
Width_Scale=0.8
Height_Scale=0.8
min_value=0
max_value=0
min_angle=0
max_angle=0
direction=2
*******************************
*******************************
[FONTSPEED]
POS_X=537.000000
POS_Y=748.000000
SCALE=1
FONTNAME=Vipnagorgialla
FONTSIZE=40
FONTCOLOR=FF00FF00
*******************************
*******************************
[FONTRPM]
POS_X=12.000000
POS_Y=13.000000
SCALE=-1
FONTNAME=Arial
FONTSIZE=60
FONTCOLOR=ffffffff
FONTSHIFTCOLOR=ff000000
*******************************
*******************************
[FONTGEAR]
POS_X=310.000000
POS_Y=750.000000
SCALE=1
FONTNAME=bigdots
FONTSIZE=50
FONTCOLOR=FFFF0000
*******************************
*******************************
[FUEL]
Pos_X=552.000000
Pos_Y=523.000000
Gauge_Dim_X=462.0
Gauge_Dim_Y=462.0
Needle_Dim_X=462.0
Needle_Dim_Y=462.0
Needle_Rot_X=231.0
Needle_Rot_Y=231.0
Width_Scale=0.83
Height_Scale=0.83
min_value=0.0
max_value=1.0
min_angle=-138.0
max_angle=-42.0
direction=1
*******************************
*******************************
[TURBO]
Pos_X=149.000000
Pos_Y=687.000000
Gauge_Dim_X=128.0
Gauge_Dim_Y=128.0
Needle_Dim_X=128.0
Needle_Dim_Y=128.0
Needle_Rot_X=64.0
Needle_Rot_Y=64.0
Width_Scale=0.8
Height_Scale=0.8
min_value=0.0
max_value=1.0
min_angle=126.0
max_angle=-90.0
direction=1
*******************************
*******************************
[LIGHTS]
SHIFT_Pos_X=316.000000
SHIFT_Pos_Y=641.000000
SHIFT_Dim_X=24.0
SHIFT_Dim_Y=24.0
SHIFT_Width_Scale=0.83
SHIFT_Height_Scale=0.83
*******************************
FUELWARN_Pos_X=765.000000
FUELWARN_Pos_Y=781.000000
FUELWARN_Dim_X=24.0
FUELWARN_Dim_Y=24.0
FUELWARN_Width_Scale=0.83
FUELWARN_Height_Scale=0.83
FUELWARN_value=0.029
*******************************
PIT_Pos_X=316.000000
PIT_Pos_Y=641.000000
PIT_Dim_X=128.0
PIT_Dim_Y=128.0
PIT_Width_Scale=0.83
PIT_Height_Scale=0.83
*******************************
TRACTION_Pos_X=648.000000
TRACTION_Pos_Y=687.000000
TRACTION_Dim_X=128
TRACTION_Dim_Y=128
TRACTION_Width_Scale=0.7
TRACTION_Height_Scale=0.7
*******************************OBS : I've changed the gear and digital speedo positions too... just to fit my taste...
I'm not sure what the issue may be, but no matter what I do, I cannot get the EK9 gauges to rotate properly. I've changed min and max values, changed rotation direction, all to no avail. If the needle does rotate properly, it's 180* out, only moving on the bottom half of the gauge. Otherwise, it moves backwards around the proper minimum and maximum values.
What gives? They're great gauges, it's a shame I can't properly use them.
What gives? They're great gauges, it's a shame I can't properly use them.
Hi
voila I am french ^ ^ therefore I am allowed to register here. Sorry if I make mistakes. I master a little photoshop meter and I adapt to changes on Lfs
So I have to start doing a meter of a Renault 5:
_______________________________________
Salut
voila je suis français ^^ donc je me suis permis de m'inscrire ici. Désoler si je vais des fautes. donc en faite je maitrise un peu photoshop et les compteur je les modifie pour adapter sur Lfs
Donc pour commencer j'ai fais un compteur d'une RENAULT 5 :
The next counter that I will do are:
Peugeot 205
Peugeot 406
Citroen 2cv
1968 Ford Mustang
I authorize the modification of the meter of the Renault 5
voila I am french ^ ^ therefore I am allowed to register here. Sorry if I make mistakes. I master a little photoshop meter and I adapt to changes on Lfs
So I have to start doing a meter of a Renault 5:
_______________________________________
Salut
voila je suis français ^^ donc je me suis permis de m'inscrire ici. Désoler si je vais des fautes. donc en faite je maitrise un peu photoshop et les compteur je les modifie pour adapter sur Lfs
Donc pour commencer j'ai fais un compteur d'une RENAULT 5 :
The next counter that I will do are:
Peugeot 205
Peugeot 406
Citroen 2cv
1968 Ford Mustang
I authorize the modification of the meter of the Renault 5
Very nice gauges 1303s_vortech, finally had time to test them. I like the glow
ones alot. If you can, do some for LX's, EK9 style.
Keep them coming, ou're doing a great job!
ones alot. If you can, do some for LX's, EK9 style.
Keep them coming, ou're doing a great job!
You mean glow gauges for LX's?...
EK9-type for LX4-LX6, usual white & glow...
No screenshots yet, sorry.
Btw, here is an udpate of uf1 gauges set... (the previous had some issues) with 1 more variant (orange 70-80s).
EK9-type for LX4-LX6, usual white & glow...
No screenshots yet, sorry.
Btw, here is an udpate of uf1 gauges set... (the previous had some issues) with 1 more variant (orange 70-80s).
Just checked them, they are awesome man. Good work. Shit that I can t test them in game cause I'm on holidays.
How to make smaller size ? This is my wish. . .
What if I do not want brown color ?
What if I do not want brown color ?
You'll have to reduce the scale of each gauges faces/lights & re-align them by messing with the positions (X/Y) values.
What you mean?...
Gaugue finger is brown
I guess you talk about the needle ...
Its .tga pics used as layers with alpa (not very hard to do with a 2d software), just need to replace with any a different one.
You can find some in the other EK9-like gauges or from any other ones.
Btw, I made them bright gold yellow (with a bit of shadow).
...Its .tga pics used as layers with alpa (not very hard to do with a 2d software), just need to replace with any a different one.
You can find some in the other EK9-like gauges or from any other ones.
Btw, I made them bright gold yellow (with a bit of shadow).
PM'd you for a favor.
Hello, I would like to know if it is possible to use many ports OutSim to use RevLimiter and Analog Gauges at the same time
.
Somebody would be able to help with it, how the anagauges works?
Read some pages ago..
Make one RPM Gauge in that style please
I simply love it!Edit: How to get vacuum AND boost?? I would like the gauge to be as functional as possible
Noted on the to do list.
I am getting late on things (upcoming sets) b/c life isn't easy sometimes...
...Read the .txt file in the same folder as any gauge.
All is explained there...
Not sure if anyone else is having this issue ...
When I start LFS, the AnaGauges program works beautifully, but when I switch tracks, the gauges no longer appear, and I have to restart LFS to get them to show up properly again.
Also, after about 5 minutes of LFS running, I get two error messages at the top-left:
ERROR:WOULDBLOCK
INSIM:ANAGAUGES CLOSED
^ Don't quote me on that exact message, I can't recall exactly what it said off the top of my head.
Anywho, the gauges will still function, and change with car changes, but as before, with track changes they disappear.
I've downloaded and reinstalled d3d8.dll several times, and from several different versions [currently running v0.17]. Also tried three different clean-installs of LFS and AnaGauges, to no avail.
When I start LFS, the AnaGauges program works beautifully, but when I switch tracks, the gauges no longer appear, and I have to restart LFS to get them to show up properly again.
Also, after about 5 minutes of LFS running, I get two error messages at the top-left:
ERROR:WOULDBLOCK
INSIM:ANAGAUGES CLOSED
^ Don't quote me on that exact message, I can't recall exactly what it said off the top of my head.
Anywho, the gauges will still function, and change with car changes, but as before, with track changes they disappear.
I've downloaded and reinstalled d3d8.dll several times, and from several different versions [currently running v0.17]. Also tried three different clean-installs of LFS and AnaGauges, to no avail.
Try with 1.0 .dll
http://www.lfsforum.net/attach ... id=35296&d=1184977615
http://www.lfsforum.net/attach ... id=35296&d=1184977615
Thanks for the response vortech! Unfortunately, the 1.0 dll doesn't solve my issue. I'll keep digging around for a solution.
@ 1303s vortech
I didn`t find any text file, but a config file which I have been editing to make the gauge the right size and stuff... Is that the right file?
And btw: Thank you very much
OT: My dad had a Monte Carlo SS with a 5,7 Vortec once... My favorite ever since
I didn`t find any text file, but a config file which I have been editing to make the gauge the right size and stuff... Is that the right file?
And btw: Thank you very much
OT: My dad had a Monte Carlo SS with a 5,7 Vortec once... My favorite ever since
Can someone tell me how to get boost and vacum pressure? I cant figure out how to fix the settings right... PM me or something.
Thanks in advance
Thanks in advance
Could you make those for the FXO in mph please? If you could it would be great
hello is that someone could get these two counter please
and
and
New Analog Gauges in LFS (Alpha)
(788 posts, started )
FGED GREDG RDFGDR GSFDG