The online racing simulator
Torsdagsrace S28 Race 3 2012-11-29 XRG@Fern Bay Rally X
Pls read the rules below carefully, and make sure you understand the meaning of them!

***Welcome to season 28, event 3 of Torsdagsrace***

Admins will be on the servers to answer all the questions
Feel free to place questions in this forum as well!

Track: Fern Bay Rally X (FE5)
Car(s): XRG
Qual: 20 min (no telepit)
Laps: 32 laps
Wind: No wind
Pitstop: No Forced pitstop
Server(s): Torsdagsrace A (+ Torsdagsrace B if more than 32 attenders)

TR Top: XRG
WR XRG: 1:16:92 (ilbens)


SCHEDULE
=========
19:00 - 21:00 CET: Warm up
21.00 - 21:20 CET: Qualification
21:30 CET Race start
Estimated race length 40 min

OFFICIAL TRAINING DAY
===================
Much more fun to train together!
Tuesday 11/27 20:00-22:00 CET
Drop in, no password set.

QUALIFICATION
============
Garage is CLOSED during Q.
- ALL setup changes, tyrechanges and refueling during qualification MUST be made on the pitsquare in the pitlane. You are NOT allowed to go into the garage and change your setup.

- If your car becomes undrivable you MUST go into spectate mode (shift-S) or into garage (shift-P). Your qualification session is then over, you are NOT allowed to rejoin (shift-J) a qualification session.

Violators that rejoin the Q will have to start the race from the garage on server B (if B are in use)

Qualification is held on servers, A and B.
A-server: Aimed for average and more skilled drivers.
B-server: Aimed for average and less skilled drivers.
B-server: Also aimed for drivers never driven TR before and late arrivals that has to midjoin the Q.

Drivers that fail to follow this conduct of honour and misplace themselves on the wrong Q-server might be taken out of the qualification by TR Admins

General Q behaviour.
- ALL drivers MUST check the "minimap" for upcoming drivers driving there hotlap.
- If you are on outlap/inlap you MUST let drivers on hotlap stay on their racing line and let hotlap driver pass in a safe way.
- Its recommended to let faster drivers pass if you have "lost" your hotlap, otherwise normal racing rules applies if both drivers are on a hotlap.
Qualification protest are treated the same way as race protests.

RACE
=====
NO mandatory pit.
You are free to go to pit of your own choice.
Rejoin race are NOT allowed after reset or spectate (shift-R/shift-S).

Would you like to participate?
Despite TR being a league, you are not required to partake every week. Simply join the races that sound fun to you! Every week a new sticky thread will be created here in TR's forum.

Sign up using our form. More information about the signup procedure is found here.
Amongst those who have signed up, we go by first-come, first-served.

WELCOME!
We have not had this combo for years now, so we admins agreed to give it a try once again
Race is a little bit shorter than usual, and the car is XRG so the tyres will hold.

OK, ready for the rotten eggs and the tomatoes now
Looks good to me.
#4 - troy
#5 - OTone
I agree
Upgraded by mistake, no backup of old version 6B, so it seems like i'm locked out tonite

Any other attender in the same situation?
Quote from sjoblom :Upgraded by mistake, no backup of old version 6B, so it seems like i'm locked out tonite

Any other attender in the same situation?

You might try using the 0.6B LFS.exe file instead, it should work I think, not sure.
Tonights password: eatmydust
Replay

Results


The TR admins will have a discussion on how to handle tonights race since there was an issue with the new LFS update. Should we re-do the race or count it a usual or skip it... You are all welcome to comment and tell us your ideas on this and hopefully we can have a solution that will make everyone happy
Problem?

I'm running a normal, standard 0.6B that was updated to this version 0.6B automatically via LFS. At least I think so.

No problem to connect to servers A or B.

It's pretty simple when it comes to patches, use the standard ones and don't mess with betas, alphas, etc. because then most people won't be able to connect to the server if you upgrade to an incompatible version.

As far as client goes... just keep the old .exe or just download the LFS package from lfs.net again, it has the standard version .exe.

FGED GREDG RDFGDR GSFDG