6BF4F6
BUGGY 2000 AWS SPEC
Created in collaboration with : Draggo & Dmitry[RUS]
DOWNLOAD & INSTALL
requires version 0.7B and up
Uploaded by :
Skin ID :
6BF4F6
Approved :
NO
Published :
(version 3)
Downloads :
11496 - online now : 0
Access :
Public
Vehicle class :
Buggy
Drive side :
Central driver position
Engine :
2 litre inline 4 / All wheel drive
Power :
224 kW (300 bhp) @ 9840 rpm
Torque :
233 Nm (172 lbft) @ 8336 rpm
Total mass :
600 kg (1323 lbs)
Power-weight :
373 W / kg (508 bhp/ton)
Transmission :
Sequential
Fuel tank size :
36 litres
Information
Comments (3)
Changelog (2)
Skins
Setups (0)
Description
The 4th car for AWS based on other existing mod
In order to expand cars list in the All-wheel-drive Winter Series,a new unique car comes to the league - a Euro autocross type buggy. Using the Buggy_1600 as a base,the powered up version will be a new challenge for AWS racers,as it will be the 1st car in league history that is not a closed cockpit car and 1st internal combustion engined car without a turbocharger.
The car received a high revving 2-liter engine similar to one found in a popular asian manufacturer's roadster from early 2000s with slight upgrade - the 300 horsepower are found way above 9k RPM mark,forcing the racers keep up the revs through turns. The engine is coupled with simple 5-speed sequential gearbox without ignition cut,unfortunatelly the clutch is found to be the weak link,as it tends to overheat if drivers are not cautios over jumps.
From the original mod this has few other alterations:
* Removed original engine/transmission 3D model and added the one from same user's other mod (Buggy_1600_V2)
* Cleared the whole 3D model from bad normals,minor adjustments to the model
* Changed front and rear wings to much simpler ones,adjusting also downforce/drag values
* Changed suspension parameters to make track width smaller and wheel base slightly longer
* Changed tyre width from 205 to 215 on front and 235 on rear axle
* Slight skin mapping alterations and fixes (with help of Draggo)
* Optimized object positions
* Removed configurations - only one is available for this mod
The car received a high revving 2-liter engine similar to one found in a popular asian manufacturer's roadster from early 2000s with slight upgrade - the 300 horsepower are found way above 9k RPM mark,forcing the racers keep up the revs through turns. The engine is coupled with simple 5-speed sequential gearbox without ignition cut,unfortunatelly the clutch is found to be the weak link,as it tends to overheat if drivers are not cautios over jumps.
From the original mod this has few other alterations:
* Removed original engine/transmission 3D model and added the one from same user's other mod (Buggy_1600_V2)
* Cleared the whole 3D model from bad normals,minor adjustments to the model
* Changed front and rear wings to much simpler ones,adjusting also downforce/drag values
* Changed suspension parameters to make track width smaller and wheel base slightly longer
* Changed tyre width from 205 to 215 on front and 235 on rear axle
* Slight skin mapping alterations and fixes (with help of Draggo)
* Optimized object positions
* Removed configurations - only one is available for this mod
Copyright Information
License applicable to elements used in this Vehicle Mod
The author of this Vehicle Mod has indicated that this work contains copyrighted material, which was made available under the following license:Mod based on : BUGGY_1600
License type : LFS Vehicle License
Redistribution / modification permission
The author of this Vehicle Mod has provided the following license, defining how this work can be redistributed, shared or modified:License type : LFS Vehicle License
Derivatives are allowed : NO
Intellectual property
This Vehicle Mod is inspired by another vehicle.General design is loosely based on Euro autocross buggies design
Disputes
Vehicle Mods have to undergo a review process to hopefully avoid any future disputes about inappropriate or unauthorised content.If however some detail has been overlooked during the review process and you wish to address this, you can file a dispute by contacting the LFS developers.
We will review every report and typically get back to you within 48 hours.
Included Skins
Skin Templates Kit
The LFS Vehicle editor provides options to create skin templates. A template helps you create skins for a vehicle by giving you the outlines of the vehicle's shape, within which you can draw the livery that will be drawn onto the vehicle.
There are 4 types of templates:
- Shaded skin template
- Black and white skin template
- White background wireframe template
- Black background wireframe template
No skin templates kit has been provided by the creator of this vehicle mod.