BZ30 ROADSTER GTR

Progress so far - this is my method, I need to visually adjust it in Blender first and then import it in LFS Editor.

Good luck with that!
Excuse me my offtopic, isn't that the same Lucas from LucasMods LFS?

Thanks! He is not the same Lucas.

Almost done with optimization (in Blender) and started to import the model - looking good so far.

Update:

Quote from Evolution_R :

Update:

Gated shifters are sexy af.

A very clean model, can't wait to drive it!

Yep, the model is very good! It's one of the reasons I decided to put some decent amount of time and energy in this mod.
Fixed some exterior stuffs (added plastic under the fender - it looks too empty without in LFS) and lights (very early look - I need to add textures). It's gonna take some time, because I'm still not 100% confident with my skills in LFS Editor (made some mistakes, had to do things twice).

Working on the interior and I've tried another set of rims - too bad configurations doesn't support different rims or I am missing something?
Would be nice if that is added later.

I actually dont know the ETK K-Series, but I own a BMW Z3 97 Model with the 2.8L straight 6.

Uploading these 2 pics, may help in any way. Looking forward to this for sure.

Thanks for the pictures, that is a really nice car you have!
- Edit - this is how it looks in BeamNG, so I will try to match that if possible.

Looking nice. If any more pics could be helpful for your work just let me know.

By the way, as I am just curious. What engine is planned to be in this car ?

2.0 liter inline-4, 2.4 liter inline-6 or 3.0 liter inline-6 (between 150hp and 300hp)

My idea is to make several configurations with different engines (like in the BeamNG mod). But haven't figure it out (maybe there will be several versions of this mod, because LFS configurations doesn't support different engines or rims, so not sure yet.)

It will be something like this, I'm trying to avoid using texture, preferring simple 3D objects.
Still not sure matt or shine / chrome elements.

It took me some more time, but I like the result.
I hope I can finish the mod until 2022.

Things to do:
- some interior and exterior texturing
- adjust the engine values
- add configurations

Then I can add the same mod with different engine and rims

Rear lights texturing (wip) (I don't know if I should post so often ), maybe this will be the last update for a while.

Been working on textures (few more left and probably will update some of them after the release of the first version).
Also I've been adding different configurations/shadows.

I'm still not happy with some of the textures.

Exploring options (the screenshots are made with edited shaders).

It's gonna take some more time - I had some driver side position problems, but I got it working now.

Looks very nice, keep it up!

^^ Thanks! Adding skins for the first time (BeamNG mod ones), I never did skins or made wireframes.

I'm on the finish line.
Will add only a wireframe for the first version.
And gonna need help with the engine sound... for now is the default XRT sound.
Tried messing around with the sound editor, but no matter what I do... it just getting worse.

Added a retracted version of the soft top (like in the original mod and I like that), it was just too empty with a simple cover I did before.
I can include both, but only 4 configurations are allowed.

Quote from Snoop.DriftEra :

Good luck with that!
Excuse me my offtopic, isn't that the same Lucas from LucasMods LFS?

isnt me lool

Quote from Evolution_R :

Added a retracted version of the soft top (like in the original mod and I like that), it was just too empty with a simple cover I did before.
I can include both, but only 4 configurations are allowed.

So what configs does it have now?

Cabrio, Cabrio Race, Soft Top and Hard Top, but not sure if they will remain the same.

I did a showcase video. Later today I will upload the mod to LFS.net for approval.

It's published now: https://www.lfs.net/files/vehmods/E2AEFA
I'm open to criticism, tell me if something is not right and I will try to fix it.
Interior is not fully finished, it lack some amount of textures.

Really good job! What happened to the i6 engine variants though?

Thanks, I will probably add it as a different version (with another rims), as well as a lower powered version with a basic rims.

A W E S O M E I love it, i think i need to learn how to use automation. I guess there is no problem with vehicles made from automation.

LOVE IT!

I having so many vibes from BeamNG drive though. I hope people will continue to make mods from BeamNG drive, I would be very down for it!

@Octosquad, I was thinking about asking BeamNG developers if I can make their official cars as LFS mods, will show them this mod as example, and if they agree, I can add some more mods like Cherrier Vivace, ETK 800.

Too many triangles on the dash?

Wooooooooooow, I cant believe how nice this is done overall. The look from outside,

the interieur, the dash fantastic, drives really great and on top of that even the rear

lights / brake lights / indicators are visible very good. I am so happy to have one

of my cars now in LFS, even more as its one of the best mods so far. Congrats on that, P V L

@P V L, I'm glad you liked it!

@xspeedasx, yes.

Quote from Evolution_R :

@Octosquad, I was thinking about asking BeamNG developers if I can make their official cars as LFS mods, will show them this mod as example, and if they agree, I can add some more mods like Cherrier Vivace, ETK 800.

Edit: I did Cherrier Vivace as unofficial mod some time ago:

Would love to see the Vivace as well!

The ETK K is greatly converted! I was actually driving it in BeamNG a few days ago and I was thinking it would be a great car in LFS as well. Could you also add the offroad version as well? Been driving this in LFS for quite some laps, and it really brings me back to the fun basics of LFS. It's light, quick-ish, and simple to drive with a great sense of feedback. Genuinely one of the best driving cars in LFS IMO. Sure some of those ugly overrated JDM cars with a huge amount of horsepower can be fun, but this just drives beautifully.

@Bose321, I'm happy you are enjoying it! I will add an offroad version, as well as police variant.

It's a pleasure to drive this ETK. Amazing drivers car for the road! :3

Exceptional work on this mod. Thanks for raising the bar

I want to sort out this variant of the mod, adding the textures and some other optimizations, so it can be easier to maintain all variants which will appear as different mods. Want to avoid doing the same changes on every variant (basic model, more powered version, offroad and police as well).

Did some veh optimizations (it was a mess ) and I've added some textures, tomorrow will continue... few buttons more and maybe will add a leather, and then I will continue with the different variants.

Only leather left (will test, maybe will add, maybe no).

I could drive this car all day.
So much fun to chuck around, and nice neutral handling.
Thanks for bringing it into LFS!

Looking like nice update. Can't wait to try out the different configs.

Car is fun, but seems like the slicks are doing it disservice. Flips easily and has too much grip on them. Otherwise great fun.

Kid222, I've noticed the same and will disallow them in the next version.
While I'm waiting for a response from BeamNG devs about the name/logo ETK, I'm working on the other variants.

I like it
absolutely perfect and flawless mod
Thx Evolution!

Some pictures of the base version (112 bhp, different rear bumper, different rims):

What do you think about adding possibility to choose slick tires- maybe in more performance version with more power and better suspension? 😁

I'm thinking about this, that's why I removed the slick tires option from this version. Probably will try to make a GTR version.

After all maybe I will have to delete this version and add it with a different name...

TT Sport version (3.0 inline 6, 301 bhp) with another set of rims:

Also working on off-road, police and GTR version.

The name issue slightly demotivated me, but I'm ok now.

This car is fantastic. Greatly balanced handling and lovely 3D gauges.

Quote from yaper :

This car is fantastic. Greatly balanced handling and lovely 3D gauges.

It's based on XRT, but with different track and wheelbase, different frame and weight distribution.
About the gauge, I tried my best, glad you like it!


And the 4th (and last) set of rims:

I've had a lot of fun with this vehicle. Hoping for it to be approved soon, good luck to you Evo. There's not a single thing i would like fixed/changed with this car. Great work.

By far one of my favourite mods right now. Good work

Very well polished. Great mod, nice to drive. To say something, I would not mind being able to drop it a bit more, but I understand it this way.

Quote from loopingz :

Very well polished. Great mod, nice to drive. To say something, I would not mind being able to drop it a bit more, but I understand it this way.

Thank you! About dropping it a bit more - are you talking about stanced version (attached example images)? I was thinking to do a version like this after other versions are done (and I still do).

@kristofferandersen, thanks! But I almost lost hope about the name... it's taking forever and until that is resolved, it cannot be approved and I might have to delete this version and lose all of the rating and upload it again.

@Facu23 - I'm happy you are enjoying it!

Post a video of what you want the car to sound like please

Later will record a video and upload it, because I cannot find good videos with sound.

Quote from Evolution_R :

Later will record a video and upload it, because I cannot find good videos with sound.

What exact car is this based of? 1995 BMW Z3 2.0i?

Yes, I think that one.

New version (5) uploaded:

- Improved headlight (glass texture is from RB4 GT) / taillight textures
- Added some interior textures
- Added lod2/lod3 skin support

made something let me know what you think

It's too muffled, but at the same time it needs to be more sharp / crisp.
Just tried Stratos_Sound.eng, sounds better to me.

Quote from Evolution_R :

It's too muffled, but at the same time it needs to be more sharp / crisp.
Just tried Stratos_Sound.eng, sounds better to me.

All right I’ll look into something more like that then, 2.0 inline 4 Non turbo is the worst sounding engine in LFS sadly

Base model with a different rims, rear bumper and exhaust mufflers:

Engine: 2.0 inline 4
Torque: 177 Nm (130 lbft)
Power: 84 kW (112 bhp)

It's in Pending review state.

Exploring offroad / rally versions.

This is amazing, keep it up. I hope to see more beamng cars here! I LOVE IT!, SPLENDID JOB!

Quote from Evolution_R :

Exploring offroad / rally versions.

That's the one I was waiting for! Looking good.

I've added turbo to the engine (~251 bhp), but still not sure about the drive type (RWD or 4WD), with visible spare tyre or not. The lightbar will be in two of the configs.

I really like how the lightbar looks from the interior view.

Probably will disable the spare tyre - it's too big for the car. Or I can put it inside...

Quote from Evolution_R :

I've added turbo to the engine (~251 bhp), but still not sure about the drive type (RWD or 4WD)

Since these cars were based on E36 chassis, I don't think they had AWD options available.

Could you please add default skin again? At the moment we get spectated if we change colours and not

use Simbroadcast TV skin. Thanks in advance.

Updated ETK K-Series (regular version):
- Added default skin
- Texture adjustments

Updated ETK K-Series Base:
- Added more power (153 bhp / 227 Nm)
- Added default skin
- Texture adjustments

Quote from Evolution_R :

I've added turbo to the engine (~251 bhp), but still not sure about the drive type (RWD or 4WD), with visible spare tyre or not. The lightbar will be in two of the configs.

I really like how the lightbar looks from the interior view.

Probably will disable the spare tyre - it's too big for the car. Or I can put it inside...

Looks great. I like the version with the spare tyre on the trunk. Looks a bit odd behind the front seats. The RWD drivetrain makes the most sense for this car I think.

If you want Evolution_R you can make this car for the SUPERstock Touring 2022 championship. It will be used on GRIP Masters - SsT 24/7 server.

CAR BUILDING RULES:
https://www.gripmasters.fi/superstock-touring-sst

Uploaded for review. Still not sure about the front grill color... and probably the suspension will need some work (now is very close to the regular version).

Lovely, lovely car! I really enjoy driving it. Nice work!

Quote from Evolution_R :

Thank you! About dropping it a bit more - are you talking about stanced version (attached example images)? I was thinking to do a version like this after other versions are done (and I still do).

@kristofferandersen, thanks! But I almost lost hope about the name... it's taking forever and until that is resolved, it cannot be approved and I might have to delete this version and lose all of the rating and upload it again.

@Facu23 - I'm happy you are enjoying it!

Well I was not thinking about the stance version. But it could work with like 6cm instead of current 8cm minimum. At the cesav race last time most fast set were lowered almost to the max available.

OK, I will drop it a bit.

Rally version is public now:
https://www.lfs.net/files/vehmods/A77E94

I'm changing the suspension to Double Wishbone (from MacPherson).

Double Wishbone suspension update - I'm trying to mix the BeamNG.drive mod suspension parts and the movable tubes in LFS:

The Z3 wasnt McPherson at least in the front?

In BeamNG they are both Double Wishbone... but it seems I cannot recreate them accurately in LFS.
If I use McPherson in front - the caster can't be adjusted, so I'm kind of lost, can't decide what to use or which is best (for now looks like both front and rear MacPherson are good enough - why change them at all?).

EDIT: For now I'm gonna leave them both MacPherson.

Yeah I know that suspension models in LFS are not perfect with some simplifications. I have done a serious race with the first version and the handling and force feedback are good. Changing might be risky. But you can try without releasing...

Updated:

[Base Version]
- Some texture optimizations
- Different default configuration
- Added the original BeamNG.drive ETK mod suspension parts
- Added more power to the engine (153 bhp -> 173 bhp)

[Regular Version]
- Some texture optimizations
- Lowered the [Cabrio Race] setup
- Added the original BeamNG.drive ETK mod suspension parts
- Added more power to the engine (201 bhp -> 252 bhp)
- Changed tires and rims size (230/35R17 -> 225/45R16)

[Rally Version]
- Some texture optimizations
- Different interior color
- Added the original BeamNG.drive ETK mod suspension parts
- Added more power to the engine (251 bhp -> 269 bhp)

In the next few days I will upload the 3.0 inline 6 version with a police configuration (with both double wishbone suspension as test).
And after that I will try to make a GTR version.

Quote from loopingz :

Well I was not thinking about the stance version. But it could work with like 6cm instead of current 8cm minimum.

In the regular version I've lowered the [Cabrio Race] setup a bit (not sure if this even changed anything because the motion range stayed the same in-game, need to do some tests), also changed the tire and rims size, as I thought the bigger rims will fit the 3.0 version better.

Made a simple skin for this mod. If you'd like to include it I'll upload the skinfile here for you.
Lovely mod!

Looking great, thanks, will add it!

There you go.

Updated the skin templates of the 3 versions of the mod. The goal was to make the cutouts as big as possible. I know I don't have to upload them here, as they are uploaded with the mods.

I had to unpublish (delete) the mods, because I don't have the right to use the name ETK without a commercial license, so I need to change the name and I will re-upload the mods soon. Also I will rename this topic title.

Re-upload will be a bit annoying I guess but there's nothing to do and I have a question. Any name ideas in mind ?

btw, they are all beautiful mods 5/5

It will be BZ30 Roadster (thanks to Draggo).

I'm expecting at some point tomorrow the mod to be uploaded and open for rating.

Please rate it, so it can become approved once again. Thank you.
https://www.lfs.net/files/vehmods/E2AEFA

EDIT:
The other three versions are published now too.
https://www.lfs.net/files/vehmods/C1B9C5 - Base
https://www.lfs.net/files/vehmods/D2BAB0 - Rally
https://www.lfs.net/files/vehmods/C07C47 - Sport

Quote from Rubie :

btw, they are all beautiful mods 5/5

Thank you! Appreciate it.

Here is the GTR version as I said I will make - https://www.lfs.net/forum/thread/97837-BZ30-ROADSTER-GTR

For now I'm done with this mod.

Thanks for giving the community such an awesome and diverse mod.
And one that's such high quality. Simply awesome.

will you make dashboard textures?

Quote from farcar :

Thanks for giving the community such an awesome and diverse mod.
And one that's such high quality. Simply awesome.

Thank you! For the next project I'm thinking about making my own (and first) 3D model from scratch.

Quote from batya123 :

will you make dashboard textures?

What do you mean, please explain?

I mean. You know there is a R8 in mods. It has dashboard textures. i mean real dashboard like in real life.So will you make any texture for dashboard like r8

No, I won't make such texture. It doesn't look very good to me, I prefer more cleaner look.

Since the mod is so close to be approved, I'm asking the people who voted overall (35) to also vote in all of the categories - it needs to be over 20 in all categories, so the mod can be approved - https://www.lfs.net/files/vehmods/E2AEFA

Thank you.

Electric version: https://www.lfs.net/files/vehmods/C60551

Edit - the mod is published now.

Quote from Evolution_R :

Electric version: https://www.lfs.net/files/vehmods/C60551

Edit - the mod is published now.

And I like it!

Quote from Octosquad :

And I like it!

I've put a lot of efforts for the lights / gauge.
Glad you like it.

BZ30 Electric i do like fun drive an electric but need fix tooo much understeer? why have Downforce rear wing only? set 0 = 33/67. Could delete downforce?

It has tiny wing on rear,which in theory can be adjusted. Also it provides max 38N downforce at 40m/s which (if I understood correctly) is like extra 38kg weight on wheels at that speed. Deffinitelly not much effect for 1.4 ton car,the option just allows have a little adjustment for higher speeds. If you feel it has too much understeer,set differential to rear as it is AWD car (that's why it's included in this year's AWS schedule).

38N is around 3.8kg it is not much but it might be realistic. These kind of car might have positive lift it is extremely comon. So negative or 0 is not too bad...

lfs physics is bit oversteery so u prob got used to it, loopingz said right, its around 3.8kg, the spoiler in such cars is only for detail and not for literal racing use of it

Working on the new gauge cluster / dashboard. It's finished now.

I'm thinking of deleting the improvised BZ30 ROADSTER ELECTRIC mod and make the proper electric version of the 2020 Hirochi CCF2.

Quote from Evolution_R :

I'm thinking of deleting the improvised BZ30 ROADSTER ELECTRIC mod and make the proper electric version of the 2020 Hirochi CCF2.

Bro I’m telling you no one really drives electric cars just look at download counts

The new electric version will be 10 times better.
Also more mods means higher maintenance time - updating something on one of the mods means updating all of the mods.

I want to ask what is the problem with the BZ30 ROADSTER GTR?
How to improve it so it can be approved? Maybe better handling?

I have updated the BZ30 Roadster with a less powerful version.

The BZ30 Roadster Sport already contains a configuration replacing the old, more powerful version of this mod.

The major update includes the following:

- Engine (252 bhp -> 148 bhp)
- Frame;
- Suspension;
- Wheels size;
- Setups;
- Sound;

Thanks to martin18!

Just wanted to note:
With this new update, now the car is closer to real life specs of a BMW Z3 with the 4cylinder option