These are the sounds that stops working from insim doc.
// DL_x - bits for OutGaugePack DashLights and ShowLights
enum
{
DL_SHIFT, // bit 0 - shift light
DL_FULLBEAM, // bit 1 - full beam
DL_HANDBRAKE, // bit 2 - handbrake
DL_PITSPEED, // bit 3 - pit speed limiter
DL_TC, // bit 4 - TC active or switched off
DL_SIGNAL_L, // bit 5 - left turn signal
DL_SIGNAL_R, // bit 6 - right turn signal
DL_SIGNAL_ANY, // bit 7 - shared turn signal
DL_OILWARN, // bit 8 - oil pressure warning
DL_BATTERY, // bit 9 - battery warning
DL_ABS, // bit 10 - ABS active or switched off
DL_SPARE, // bit 11
DL_NUM
};
//////
#endif
Any chance that someone might update CSR to again make use of these sound possibilities?? And maybe add the ones missing
I have found that I am missing the sound for pit limiting in csr when I use the new patch.
I have a loud pit limit sound in Z, but nothing in Z25... have the outgauge value, field or what been changed, deleted??????
Edit:
I see now that a whole section of insim has been changed, and pit limit value is in this section:
Z25:
int ID; // optional - only if OutGauge ID is specified
};
// OG_x - bits for OutGaugePack Flags
#define OG_TURBO 8192 // show turbo gauge
#define OG_KM 16384 // if not set - user prefers MILES
#define OG_BAR 32768 // if not set - user prefers PSI
// DL_x - bits for OutGaugePack DashLights and ShowLights
enum
{
DL_SHIFT, // bit 0 - shift light
DL_FULLBEAM, // bit 1 - full beam
DL_HANDBRAKE, // bit 2 - handbrake
DL_PITSPEED, // bit 3 - pit speed limiter
DL_TC, // bit 4 - TC active or switched off
DL_SIGNAL_L, // bit 5 - left turn signal
DL_SIGNAL_R, // bit 6 - right turn signal
DL_SIGNAL_ANY, // bit 7 - shared turn signal
DL_OILWARN, // bit 8 - oil pressure warning
DL_BATTERY, // bit 9 - battery warning
DL_ABS, // bit 10 - ABS active or switched off
DL_SPARE, // bit 11
DL_NUM
};
//////
#endif
Z:
int ID; // optional - only if OutGauge ID is specified
};