Hello heres my parts I'm getting and I also need your feedbacks Thanks.

Here they are....

Case: NZXT Tempest

CPU : AMD Phenom II X4 990 DDR3-1333 3.5 GHz Quad Core (COMING SOON)

CPU Cooler : ASUS Triton 81 92mm EBR CPU Cooler
Bearing Type EBR
RPM 800 - 2500 RPM ± 10%
Power Connector 4 Pin with PWM Control
Heatsink Material Copper base + Aluminum fins + 4 x 6mm Copper Heat Pipes
Physical Spec
Fan Dimensions 92 x 92 x 25mm

Motherboard: ASUS M4A79T Deluxe AM3 DDR3 AMD 790FX ATX AMD
# CPU Type: Phenom II / Athlon X4 / Athlon X3 / Athlon X2
# FSB: 2600MHz Hyper Transport (5200 MT/s)
# South Bridge: AMD SB750
# Number of Memory Slots: 4×240pin
# Memory Standard: DDR3 1600
# Maximum Memory Supported: 16GB
# PCI Express 2.0 x16: 4 x PCI Express 2.0 x16 (dual X16, triple X16/X8/X8, or Quad X8)
# SATA 3Gb/s: 5

Memory: Patriot Viper 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit
Type 240-Pin DDR3 SDRAM
Tech Spec
Capacity: 4 GB (2 x 2GB)
Speed DDR3 1600 (PC3 12800)
Cas Latency 7
Timing 7-7-7-20
Voltage 1.9V
Heat Spreader Yes
Recommend Use High Performance or Gaming Memory

Video Card: SAPPHIRE Radeon HD 4870 X2 2GB 512-bit (256-bit x 2) GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card

Hard Drive: Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
# Cache: 32MB
# Form Factor: 3.5"
# Features: High Performance Electronics Architecture Dual processor - Twice the processing power to maximize performance. 32 MB cache - Bigger, faster cache means faster performance. Rock Solid Mechanical Architecture StableTrac - The motor shaft is secured at both ends to reduce system-induced vibration and stabilize platters for accurate tracking, during read and write operations. NoTouch

Power Supply: NZXT Performance Power PP800 800W ATX 12V 2.2V SLI Ready CrossFire Ready Power Supply
# Fans: 120mm Fan @ 1900 RPM
# Main Connector: 20+4Pin
# +12V Rails: 4
# PCI-E Connectors: 2 x 6Pin, 2 x 6+2Pin
# Power Good Signal: 100-500ms
# Hold-up Time: 16ms min.
# Efficiency: Up to 85 %
# Over Voltage Protection: Yes

OS: Microsoft Windows Vista Ultimate SP1 64-bit for System Builders

This will obviously be a high-end system, so why not get the Phenom II 940? The 810 isn't even a Black Edition, so it will have a locked multiplier so you can't overclock easily.

Well the motherboard is AM3 and the AMD Phenom X4 940 is AM2+ it wont work...

So anymore feedbacks?

Oh whoops, I thought AM3 was compatible with AM2+ processors, but it turns out it's the other way around, AM2+ is compatible with AM3 processors, but AM3 only supports AM3 processors.

I think you should wait a month or so for AMD to release better Phenom II processors, cause the 810 is a mid-range processor, not a high-end one. You should get a Black Edition processor, these Phenom IIs are really good for overclocking. Here are the upcoming Phenoms: http://en.wikipedia.org/wiki/L ... MD_Phenom_microprocessors

Why are they all DDR3-1333 because my motherboard is 1600

Because the new Phenoms IIs "officially" only support DDR3-1333 and DDR3-1066, and so does your motherboard. The DDR3-1600 is only by overclocking.

Here's what it says on ASUS' site:
4 x DIMM, Max. 16 GB, DDR3 1600(O.C.)/1333/1066 ECC,Non-ECC,Un-buffered Memory