i have got a sever running. i want a insim in. i have got all the codes but when i load the insim up it comes up with error message and when i try and load in game it comes up with another message. ( shown in pic attachment.)

Any help?
Thanks =)

the message in lfs says enough... tcp bind failed. pick a port that isn't in use.

Still does it when changed the port number.

What port numbers are you using? The 'default' is 29999.

// host name
/host=Testing !
// optional: password
//pass=password
// optional: admin password
//admin=sion
// optional: InSim port
//insim=29999
// optional: local specified ip address
//ip=92.236.69.245
// a high number below 65536
/port=63392
// demo/s1/s2
/mode=s2
// no/yes/hidden
/usemaster=yes
// BL1/BL1R/BL2, SO1/SO1R/SO2, etc
/track=AS5
// weather
/weather=1
// cars allowed
/cars=road
// max guests that can join host
/maxguests=2
// slots reserved for admins (0 to 8)
/adminslots=1
// max cars in a race
/carsmax=5
// max cars (real+ai) on host pc
/carshost=1
// max cars (real+ai) per guest pc
/carsguest=1
// smoothness (3-6) number of car updates per second
/pps=4
// qualifying minutes, 0 for no qualifying
/qual=0
// number of laps, 0 for practice
/laps=0

Quote from sion92 :

// optional: InSim port
//insim=29999

Change that to this:

Quote from sion92 :

// optional: InSim port
/insim=29999

...and see if it helps.

Nope...

Are you running the server on the same machine as you're running the InSim application you're trying to connect to it? If not is the InSim port open to external traffic?

edit: Btw, the reason I suggested the above change is that lines in the config file which have double slashes at the start are ignored. Only lines with a single slash are actually used by LFS.

Its not possible to let run an insim without an admin password

replace //admin=sion to /admin=sion
that will help 100%

Nope. still not working.

i am running the server and insim from my pc for now... well trying to

Ok lets look at this logically.

The config you're pasting is for the dedi.
The screenshot shows the InSim client error and the full version of LFS.

Could you give us more information because it's all a bit unclear the moment.

* Are you running the dedi on your PC?
* Are you also running the full version of LFS on your PC?
* Are you using any InSim modifications on your full version of LFS?
* What connection details have you given the InSim client (presumably default of localhost 29999)?

Assuming yes to all these you need to:
1. Ensure that the full version of LFS and the dedi use different InSim port numbers
2. Ensure that you're telling the InSim programs to connect to the right place with the corresponding port numbers