Ok tested and seems to be fixed
+1
Ok tested and seems to be fixed
+1
It is limited to 63 characters :
Diese Live for Speed Installation wird auf den Inhalt der Demov
"Live for Speed sperren?
Nur DEMO Inhalt wird verfügbar sein!"
Nur DEMO Inhalt wird verfügbar sein!"
What about: "Damit wird nur noch der Inhalt der Demo-Version verfügbar sein."
Exactly 63 characters, btw.
Exactly 63 characters, btw.
It's only the second line that is limited to 63 characters.
I am assuming the first line is OK. So we just need a max 63 chars translation of :
Only DEMO content will be available
So far we have three entries :
Nur DEMO Inhalt wird verfügbar sein!
Damit wird nur noch der Inhalt der Demo-Version verfügbar sein.
LFS wird auf den Demo Inhalt begrenzt sein!
Which is the best one?
"LFS wird auf den Demo Inhalt begrenzt sein ! "
In English " LFS will be limited to the Demo Content "
In English " LFS will be limited to the Demo Content "
not restricted minimum height in shift+u mode is great imho and not restricted speed of movement (down to 0,1m/s) in shift+u would be also great for video makers if it would be possible and easy could you devs make this for me? thx
if it would be possible and easy could you devs make this for me? thx Z28 Tested and works great, good job!
I noticed that LFS logs last selected LAN server, confusion or possibility?
Silly me, forgot to remove the debug message
I think I prefer this one :
Nur Demo Inhalt wird verfügbar sein
Because it is an exact translation of the English one, but "Demo" is used instead of "DEMO" - consistent with the rest of the Deutsch translation.
Is that ok?
Nur Demo Inhalt wird verfügbar sein
Because it is an exact translation of the English one, but "Demo" is used instead of "DEMO" - consistent with the rest of the Deutsch translation.
Is that ok?
Maybe it is only the english original that is wrong
It should be:
"Nur Demo-Inhalt wird verfügbar sein."
Connected with the hiphen or what it's called. Two nouns following each other doesn't really make sense in german.
English is fine if you leave out some words
I've taken zeugnimod's as the final version.
He is right. Although it's nearly too short considering it's a German sentence.
IMPORTANT NOTE TO ANYONE WHO GOT THE PREVIOUS Z28 TEST EXE :
I have removed a debug message and reduced minimum speed in SHIFT+U mode. That means, the one you tried is no longer the "real" Z28.
An updated and hopefully final Z28 can be found below : http://www.lfsforum.net/showthread.php?p=1315740#post1315740
Please download this one (or use the Z28 patch when it is ready) or you may have problems unlocking. Thank you.
I have removed a debug message and reduced minimum speed in SHIFT+U mode. That means, the one you tried is no longer the "real" Z28.
An updated and hopefully final Z28 can be found below : http://www.lfsforum.net/showthread.php?p=1315740#post1315740
Please download this one (or use the Z28 patch when it is ready) or you may have problems unlocking. Thank you.
Ok . Ready for physic stuff 
Edit : No problem to patch, back to Z27 !
Edit : No problem to patch, back to Z27 !
Z28 test
Here is a Z28 exe, fixing two LFS.exe issues that were found.
- Could not join S1 or S2 host after unlocking from Multiplayer screen
report by alxf1 : http://www.lfsforum.net/showthread.php?p=1315322#post1315322
- Multiple host passwords are now stored for local network hosts (by ip and port)
report by adamshl : http://www.lfsforum.net/showthread.php?p=1315093#post1315093
- Also reduced the minimum speed in SHIFT+U mode to 0.1 m/s
tiny request by bavorak : http://www.lfsforum.net/showthread.php?p=1315675#post1315675
If this works well then we'll be ready to try a hopefully final Z28 installer with some fixes and updates Victor has done.
- Could not join S1 or S2 host after unlocking from Multiplayer screen
report by alxf1 : http://www.lfsforum.net/showthread.php?p=1315322#post1315322
- Multiple host passwords are now stored for local network hosts (by ip and port)
report by adamshl : http://www.lfsforum.net/showthread.php?p=1315093#post1315093
- Also reduced the minimum speed in SHIFT+U mode to 0.1 m/s
tiny request by bavorak : http://www.lfsforum.net/showthread.php?p=1315675#post1315675
If this works well then we'll be ready to try a hopefully final Z28 installer with some fixes and updates Victor has done.
Youre working hard on these small bug fixes and some nice updates, but where do you get all the time working on the physics?
I think you are finish, but your just cleaning tiny bugs before releasing it, thats my thinking..
Looking forward for it!
I think you are finish, but your just cleaning tiny bugs before releasing it, thats my thinking..
Looking forward for it!
You are wrong - there is still a significant amount to do on physics.
One thing is leading to another as usual... and good things are lined up.
But I am not going to talk about that on the test patch thread.
Tested again. Still seems to be working now.
Afaik nobody tested this till now !? Due to lack of multiple Hosts it is not testable for "normal" user
Sounds like theres still a lot of time to wait
You can have multiple hosts on a LAN. A "normal" user with only one computer can also set up multiple dedicated hosts on their own computer, with different ports, then use the local IP address 127.0.0.1 to connect to those hosts.
Anyway one way to test is simply by entering a password, type a new host ip address or port, switch between internet and local mode, etc. To see if the password is always updated as expected.
And ? Let devs in their work.
I guess they're aiming for a Christmas release, but we'll see. Software development time can be quite unpredictable if delivering an unfinished product is not an option.
I will try to test this.
---------
In Shift-U mode i pressed "D" and this came out. What is this ?
This thread is closed
Test Patch Z27 (installer test + minor updates)
(105 posts, closed, started )
FGED GREDG RDFGDR GSFDG