Hi!
I searshed in setupgird and didn't find it so here I am asking for an Endurance set (that can do 1hour stint) for FE4 for GT2 XRR.

you could try this one...

http://www.setupgrid.net/1/setup/endu/get/XRR@FE3

and change the final drive ratio to 3.475.

just an idea... haven't tried it, but let us know how you make out.

I tried FE4 GT1 one and it works pretty
Thing is I only changed gearbox to make it fit to GT2 but I don't know what do I need to change more to make it fit with the 350hp...

Quote from Sir moi 407 :

Thing is I only changed gearbox to make it fit to GT2 but I don't know what do I need to change more to make it fit with the 350hp...

leave the ratios the same as RACE_S and change the final drive ratio to 3.475.

there might be a better ratio to use, but i suck at gearboxes.

I mean, other things, not Gearbox
Like suspension etc...

well, you might want to drop some downforce, but i don't see the engine specs having any conflicts with suspension.

Quote from bunder9999 :

well, you might want to drop some downforce, but i don't see the engine specs having any conflicts with suspension.

I'd agree with that. A bit less downforce [probably -1/-1 for FE] and that'll all you'll want as the corner speeds are the same [basically]

Ok thanks I'll try it
But now I have a big problem, I always end up upside down in this track and it's really pissing me off
I know the first problem are my trajectories but I'd like to know what I can change in the setup so the car doesn't flip so easely?

Soften the suspension?

It's a natural feature of the XRR with high kerbs

I guess modifying setup like this (if it is ever possible to make XRR not to roll over on Fern Bay curbs) will only result in slower times. Just do 100 laps, learn the track, watch out for the curbs and learn which curbs are possible to run over without any harm etc.

Quote from Drift King CZ :

I guess modifying setup like this (if it is ever possible to make XRR not to roll over on Fern Bay curbs) will only result in slower times. Just do 100 laps, learn the track, watch out for the curbs and learn which curbs are possible to run over without any harm etc.

I can really only think of 3 places where you could roll over on a normal lap. No wait 4, or 5?

@Sir Moi : P. Peron has done a good one making 2.24.52 with full tank

I don't care about P. Peron lap times :P He did it with R2s anyway... and we all know it is impossible to do 1hour stint in FE4 with R2s
Anyway the set is for me, not for him ^^
I managed to make the car less flippy while not making it slower by simply increasing the height of the suspensions.
Well... Now it's all a matter of training in this frustrating combo
But I'm still not sure if I'll be able to hold the car on track for 1hour... probably not

Quote from bunder9999 :

you could try this one...

http://www.setupgrid.net/1/setup/endu/get/XRR@FE3

and change the final drive ratio to 3.475.

just an idea... haven't tried it, but let us know how you make out.

Is that GT2 setup in that link?
They should make another section for GT2 setups in setupgrid.net! It would be quite useful, since there are quite many leagues that use restriction.

Quote from andRo. :

Is that GT2 setup in that link?

i don't believe so, that's why i recommended changing the gear ratio.