LFS Forum - Bug Reports

#126 - Michalxo

Sun, 10 Jan 2010 11:25

Quote from Gai-Luron :Hello,

Do you select session PB in !myconfig?

Nope, i've never heard of that...

#127 - Gai-Luron

Sun, 10 Jan 2010 13:56

razspb is only for session pb, no saved PB

#128 - emit-nl

IdleExclude function in LFSLapper

Sun, 31 Jan 2010 17:37

Hi,

For a while, I have a problem with the IdleExclude function in LFSLapper.
I'm using the newest version of LFSLapper, v5.9.2.5.
I'm not sure how long I'm dealing with this issue, so I can't say in which version of LFSLapper it was still working. (after v5.844 I remade my serverscript)

Explanation of the bug:

When I ('emit-nl') am the only one racing on the server, the IdleExclude function works fine!
When 'Seafalcon' is the only one racing on the server, it is working fine too.
When we are racing together on the server, we will both get the warning message after 60seconds and we will be spectated after being idle for 70seconds..

Could this be a bug in LFSLapper or have I made an error in my code?

My code:

##################################
#Options for idle player on track#
##################################

$IdleExclude = "emit-nl, Seafalcon"; # Usernames excluded for idle check

$OnIdleTimeout1 = 60; # Idle timeout for OnIdleAction1 in seconds

Event OnIdle1( $userName ) # Player event
	privMsg( langEngine( "%{main_idle1}%" ) );
EndEvent

$OnIdleTimeout2 = 70; # Idle timeout for OnIdleAction2 in seconds

Event OnIdle2( $userName ) # Player event
	cmdLFS( "/spec " . GetCurrentPlayerVar("NickName") );
	privMsg( langEngine( "%{main_idle2}%" ) );
EndEvent

Thanks in advance!

Tim

#129 - Tim NL

!who is not working in 6.00

Sun, 28 Feb 2010 17:46

Hi,
I have installed ver6.00 everything works super

.
Only the new !who script work not ok.
It shows only one player incase of the complete list of players.

#130 - Fire_optikz001

Sun, 28 Feb 2010 19:25

Quote from Tim NL :Hi,
I have installed ver6.00 everything works super

.
Only the new !who script work not ok.
It shows only one player incase of the complete list of players.

i have noticed this too i was wondering what happened idk if it was just me tho

#131 - Gai-Luron

Sun, 28 Feb 2010 19:35

Bug in who.lpr

Add line unset( $currPly ); near line 105 in who.lpr


            $currUserName = $ListOfPlayersDoWho[$i];
            unset( $currPly );
            $currPly = getplayerinfo($ListOfPlayersDoWho[$i] );

#132 - Krayy

Sun, 28 Feb 2010 19:51

Quote from Gai-Luron :Bug in who.lpr

Add line unset( $currPly ); near line 105 in who.lpr


            $currUserName = $ListOfPlayersDoWho[$i];
            unset( $currPly );
            $currPly = getplayerinfo($ListOfPlayersDoWho[$i] );

My bad...I couldn't use a FOREACH as the FOR loop is required to print from user 16 to 32 on a 2 page output.

Also, the line above that unset ($currUserName = $ListOfPlayersDoWho[$i]

is not required at all.

#133 - Gai-Luron

Sun, 28 Feb 2010 20:26

I also do a modification to avoid use of unset for var if it's assigned with getOfxxxxxx function.

#134 - Bass-Driver

Sun, 14 Mar 2010 10:10

hi
i think i found a bug in: GetLapperVar("LongDate")
it must show the date of the current day right.
i have made some tests few min ago and it shows the date from yesterday.

i have running lapper 24/7
and current version is:5.925

edit:
it change to the next day around 12:00 AM
i think lapper has lil problem with AM and PM

#135 - Gai-Luron

Tue, 16 Mar 2010 07:43

This function return server date, it's not really a Lapper Function, but system function

How is set your server date?

Gai-Luron

#136 - Fire_optikz001

Tue, 16 Mar 2010 13:06

Quote from Bass-Driver :hi
i think i found a bug in: GetLapperVar("LongDate")
it must show the date of the current day right.
i have made some tests few min ago and it shows the date from yesterday.

i have running lapper 24/7
and current version is:5.925

edit:
it change to the next day around 12:00 AM
i think lapper has lil problem with AM and PM

you have to restart LFSLapper.EXE to change time :P

#137 - Bass-Driver

Tue, 16 Mar 2010 14:04

Quote from Gai-Luron :This function return server date, it's not really a Lapper Function, but system function

How is set your server date?

Gai-Luron

thx it solved
i have checked the pc where lapper is running on and it seems that the time is wrong, it was 3:00(am) and not 15:00(pm)
i dont know whats happend but i thinks it works fine now

-

(Bass-Driver) DELETED by Bass-Driver

Sat, 20 Mar 2010 13:48

#138 - Krayy

Here a cast, there a cast...

Tue, 30 Mar 2010 19:36

Okay, so I am defining an array using some Consts as the index like this:

consts.lpr:



<?php 
# Membership status
const MEMBERTYPE_UNKNOWN        -1; # Player has not been here before
const MEMBERTYPE_VISITOR        0; # Player is a visitor
const MEMBERTYPE_GUEST            1; # Player is a vouched for guest
const MEMBERTYPE_JUNIOR            2; # Player is Junior Member and subject to review
const MEMBERTYPE_FULL            3; # Player is a full member
const MEMBERTYPE_MAX            4; # Used as a upper limit for iterators
?>

utils.lpr:



<?php 
CatchEvent OnLapperStart()
    ### Global vars for Membership names ####
    GlobalVar $MemberTypes;
    $MemberTypes[MEMBERTYPE_VISITOR] = "Visitor";
    $MemberTypes[MEMBERTYPE_GUEST] = "Guest";
    $MemberTypes[MEMBERTYPE_JUNIOR] = "Junior";
    $MemberTypes[MEMBERTYPE_FULL] = "Full";
    $MemberTypes[MEMBERTYPE_MAX] = "MAX";
EndCatchEvent
?>

When I try to use that array like this:



<?php 
    $mName = $MemberTypes[2];
?>

, I get a NULL string. Turns out that I have to explicitly cast the Const as a number to initialise the aray like this:

utils.lpr:



<?php 
CatchEvent OnLapperStart()
    ### Global vars for Membership names ####
    GlobalVar $MemberTypes;
    $MemberTypes[ToNum(MEMBERTYPE_VISITOR)] = "Visitor";
    $MemberTypes[ToNum(MEMBERTYPE_GUEST)] = "Guest";
    $MemberTypes[ToNum(MEMBERTYPE_JUNIOR)] = "Junior";
    $MemberTypes[ToNum(MEMBERTYPE_FULL)] = "Full";
    $MemberTypes[ToNum(MEMBERTYPE_MAX)] = "MAX";
EndCatchEvent
?>

Hmm. Is this a problem with the parser not realising tha the Const is a numeric? Because as far as I can tell, all of the Const.lpr entries are numbers, not strings.

#139 - Gai-Luron

Wed, 31 Mar 2010 15:24

I think ( i am not sure ) const don't work in array Index. You can bypass it using

GlobalVar $MemberTypes;
$idx = MEMBERTYPE_VISITOR;
$MemberTypes[$idx] = "Visitor";
$idx = MEMBERTYPE_GUEST;
$MemberTypes$idx] = "Guest";
...
and so on

Gai-Luron

#140 - Krayy

Wed, 31 Mar 2010 21:33

Quote from Gai-Luron :I think ( i am not sure ) const don't work in array Index. You can bypass it using

GlobalVar $MemberTypes;
$idx = MEMBERTYPE_VISITOR;
$MemberTypes[$idx] = "Visitor";
$idx = MEMBERTYPE_GUEST;
$MemberTypes$idx] = "Guest";
...
and so on

Gai-Luron

Looks like the same applies to CASE statements as well, where I need to explicitly cast a const to be able to use it...i.e:



<?php 
    SWITCH( $mType )

        CASE ToNum(MEMBERTYPE_VISITOR):
...
etc
?>

#141 - emit-nl

Mon, 3 May 2010 19:49

I found a little bug a while ago. On the begin of a pitstop the pitwork must be showed, but it isn't. pitWork has to be changed to PitWork. (capital P)

privMsg( langEngine( "%{main_pitwork}%", GetCurrentPlayerVar("pitWork") ) );

must be:

privMsg( langEngine( "%{main_pitwork}%", GetCurrentPlayerVar("PitWork") ) );

Regards
Tim

#142 - iOL(Qc)

Version just changed?

Sun, 6 Jun 2010 05:12

I'm about to show my work on the lapper to friends when i have errors leading to stand-by mode.

Everything worked great just before i went to eat about an hour ago.

I redownload the lapper, and see that its a new version.
Could this be the cause of all the sudden error's?

There is no more: Sub DisplaySpeed( $userName ) , so i cant use: RegisterNodeAction( "XXX" , 300 , DisplaySpeed,ExitDisplaySpeed );
I tryed to create it and got error's.
Node's does not exist anymore?
We cannot create variables no more?

My work seems unusable now?

What am i suposed to do?
Im confused.

I had:


Sub DisplaySpeed( $userName )
 $topSpeed = GetCurrentPlayerVar("topSpeed");
 $speed = GetCurrentPlayerVar("InstantSpeed");
 IF ($topSpeed == 0)
 THEN
  setCurrentPlayerVar( "topSpeed",$speed );
  $topSpeed = GetCurrentPlayerVar("topSpeed");
  privMsg( langEngine( "^7Première passe: ^3{0} ^7{1} " , $speed,GetCurrentPlayerVar("UnitSpeed") ) );
 ENDIF
 IF ($topSpeed != 0 && $speed > $topSpeed)
 THEN
  $difference = $speed - $topSpeed;
  setCurrentPlayerVar( "topSpeed",$speed );
  $topSpeed = GetCurrentPlayerVar("topSpeed");
  privMsg( langEngine( "^7N o u v e a u   t o p   s p e e d: ^3{0} ^7{1} ^2+{2}",$topSpeed,GetCurrentPlayerVar("UnitSpeed"),$difference));
 ENDIF
 IF ($topSpeed != 0 && $speed < $topSpeed)
 THEN
  $difference = $topSpeed - $speed;
  privMsg( langEngine("^7Vitesse: ^3{0} ^7{1} ^1-{2}",$speed,GetCurrentPlayerVar("UnitSpeed"),$difference));
 ENDIF
EndSub
Sub ExitDisplaySpeed( $userName )
 PrivMsg( "Sorti du Speedtrap" );
 /* 302 to 1019
 $listOfPlayers = GetListOfPlayers();
    $currTopSpeed = GetStoredValue( "GlobaltopSpeed" );
 $newTopSpeed = 0;
 FOREACH( $currUname IN $listOfPlayers )
    {
        $currTopSpeed = getPlayerVar( $currUname,"topSpeed" );
  IF($currTopSpeed > $newTopSpeed)
  {
   $newTopSpeed = $currTopSpeed;
   $unit = GetPlayerVar( "$currUname","UnitSpeed" );
   $nom = getPlayerVar( "$currUname","NickName" );
  }
  ENDIF
    }
 ENDFOREACH
 IF($newTopSpeed > GetStoredValue( "GlobaltopSpeed" ))
 {
  SetStoredValue( "GlobaltopSpeed", $newTopSpeed );
  globalMsg( langEngine( "F a s t e s s  s p e e d t r a p: {0} {1}{2}", $nom,$newTopSpeed,$unit ) );
 }
 */
 ENDIF
EndSub
Event OnLapperStart()
 
 RegisterNodeAction( "BL1" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "BL1R" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "BL2" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "BL2R" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "FE1" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "FE1R" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "FE2" , 300 , DisplaySpeed,ExitDisplaySpeed );
 RegisterNodeAction( "FE2R" , 300 , DisplaySpeed,ExitDisplaySpeed );
 ...

#143 - Gai-Luron

Sun, 6 Jun 2010 10:00

Hello,

First Check if you have error in log file. ( Log files are on log folder )

Gai-Luron

#144 - iOL(Qc)

Sun, 6 Jun 2010 16:02

I reinstalled the same version now :5.841. Yesterday i downloaded the 5.716 in an hurry wich seems very different that's why i was so confused.
But now i cant even start the lapper. In lfs i have the message LFS Lapper In Stand By state. There is no error messages.

(I think at the first launch i had a message like can't connect to 127.0.0.1 in console.) But now nothing.

Here is the log
LFSLapper-MSS.log:
6/6/2010 11:41:19 AM -> Started - LFSLapper Version=5.8.4.1
6/6/2010 11:42:08 AM -> Started - LFSLapper Version=5.8.4.1
6/6/2010 11:43:02 AM -> Started - LFSLapper Version=5.8.4.1
6/6/2010 11:45:34 AM -> Started - LFSLapper Version=5.8.4.1
6/6/2010 11:51:35 AM -> Started - LFSLapper Version=5.8.4.1

EDIT: LFSLapper.exe is added in my firewall exceptions.
EDIT: I'v set the LFSserver.cfg to autowork and i have a lapper instance abord
LFSLapper-MSS.log:
15/02/2010 21:18:37 -> Not a connexion packet! Close connection

What am i doiing wrong?

Olivier

#145 - Bass-Driver

Sun, 6 Jun 2010 17:32

did u try to start lapper manual ingame
or try the latest version of lapper

#146 - iOL(Qc)

Sun, 6 Jun 2010 18:15

problem solved: the only version that work for me is 5.926

I use windows 7

Olivier

#147 - Gai-Luron

Sun, 6 Jun 2010 21:11

Or 6.00

#148 - Fire_optikz001

Sun, 4 Jul 2010 15:31

Quote from Fire_optikz001 :i have 6.0.1.0 and UserIsAdmin( $userName ) no longer works o.o

also you cant use {0:0.00%} in the languages for some reason

#149 - sinanju

Sun, 4 Jul 2010 16:16

New version of lapper (6.010) still has bug in driftmeter.lpr.

Has main_ongooddrift - should be driftmeter_ongooddrift

#150 - Fire_optikz001

Fri, 9 Jul 2010 21:30

in 6.0.1.0 and 6.0.1.1 when you use the {0:C} stuff in the language things it just outputs the strings asif they were just entered as {0}