Hello guys,

What is good angle for AngleVel in MCI I just can't find a good angle settings for AngleVel in MCI or I mean the / < thing tnx its like im making a Drift Angle with a good AngleVel in MCI

My code is like this
CompCar.AngleVel / 20

AngVel is angular velocity, i.e. the rate of change of the heading. It bears little meaning in evaluating drifting performance because there is a high chance of peak AngVel occurring in-between two MCI packets due to the relatively low MCI frequency of 20Hz (at min. interval of 50ms).

Anyway, as documented in InSim.txt:
(16384 = 360 deg/s, meaning 45.511 = 1 deg/s)

Edit: IIRC negative values are counter-clockwise.

Quote from morpha :

AngVel is angular velocity, i.e. the rate of change of the heading. It bears little meaning in evaluating drifting performance because there is a high chance of peak AngVel occurring in-between two MCI packets due to the relatively low MCI frequency of 20Hz (at min. interval of 50ms).

Anyway, as documented in InSim.txt:

deg_sec = AngVel / 45.511;

(16384 = 360 deg/s, meaning 45.511 = 1 deg/s)

Edit: IIRC negative values are counter-clockwise.

tnx morpha love lots :lovies3d: