Hi.

I was wondering if there are any G25 users out here that have this problem that I have who could help me. I've used this wheel for maybe 3 years now and overtime it has somehow started to wear out and by that I mean the center point of the wheel keeps changing when you turn it too fast into one direction or you just drive normally with the FFB on and turn against it. I've done some research on it and supposedly the optical sensor inside that black box on the left FFB motor is causing it because it was loose. I actually opened the wheel up and then did exactly what this other user did here:

http://img517.imageshack.us/img517/4621/dsc00501.jpg

http://img26.imageshack.us/img26/3452/dsc00502a.jpg

After assembling it and plugging everything in the wheel still functions but the problem remains for some inexplicable reason. I really don't know what is be causing it so I was hoping someone here could help me because it would be a shame to throw this wheel away because of this issue.

Also before anyone says I should return it and get a replacement I can't do that because my warranty ended 2 years ago.

Does this only happen in LFS?
Did you remove the black cover from the back of the motor?

If you remove the cover then you will see a little circuit board that is screwed to a bracket (that is screwed to the motor), ensure all four screws are tight.
Also on the motor shaft is a slotted plastic ring, this should be firmly attached to the shaft (sometimes they become loose/crack).

Pictures can be seen in the firsst post here:-
http://forums.logitech.com/t5/ ... -p/406468/page/4?nobounce