The online racing simulator
KRT cr
(103 posts, started )
Okay, i fix that later Wink
Update for tomorrow!
Hi, New KRT UPDATE!
#Update Mass and physic
#Up the top of the body
#New skin! Extension correctly mapped now
Attached images
UPDATE KRTCR.PNG
UPDATE KRTCR2.PNG
Hello. I have a question. How to make a second auto configuration? Buggy class. Alternative option with other tires.
I missed something and can't find the information I need.
I learned how to make the configuration of a 3D model, but I can’t find the configuration of a car in the tire prana.
It is still not possible for configurations to affect other parts of the model. At the moment configurations only apply to the mesh.

I know that configurations affect the tyres with the official GTR cars but that was a hard coded system. An editable version of that is still only a note on a list at this time.
Quote from Scawen :It is still not possible for configurations to affect other parts of the model. At the moment configurations only apply to the mesh.

I know that configurations affect the tyres with the official GTR cars but that was a hard coded system. An editable version of that is still only a note on a list at this time.

And how is the KRT cr model made? It also seems to have two tire configurations in the buggy class.
It seems the krt cr has:

- 2 mesh configurations (named Cross and Hillclimb)
- 2 default setups (named default and Hillclimb)

1st default setup has hybrid tyres and 'Cross' configuration
2nd default setup has slick tyres and 'Hillclimb' configuration
Quote from Scawen :It seems the krt cr has:

- 2 mesh configurations (named Cross and Hillclimb)
- 2 default setups (named default and Hillclimb)

1st default setup has hybrid tyres and 'Cross' configuration
2nd default setup has slick tyres and 'Hillclimb' configuration

Thanks!
That is, if I make a 1600 buggy, a racing version and a road version, then I somehow and where to change tires?!...
While in my head I can not figure out where I will change)
Thanks for the direction.
You create a second default setup - "dup" button at bottom left in vehicle editor.

Right click to rename the new setup.

Then for that setup you select different tyres, and different configuration, that's all. Smile
Quote from Scawen :You create a second default setup - "dup" button at bottom left in vehicle editor.

Right click to rename the new setup.

Then for that setup you select different tyres, and different configuration, that's all. Smile

THANK YOU VERY MUCH!!! This is wonderful! THANKS!Smile
Hi
NEW KRT CR UPDATE!
#New rear suspension physic & graphic!
Attached images
MAJ SUSPENSION B.png
MAJ SUSPENSION A.png
Hi! New KRT CR Update
#Suspension again
#450° steering wheel

The kart seems really good! Enjoy!
Attached images
MAJ SUSPENSION C.png
Hi! New KRT CR Update!
#after 500 hours of search, the physic is really perfect (in my point of view)!
Enjoy and return your feelings!
Left is old suspension on the right the new suspension!
Attached images
AVANT.png
APRES.png
Hi new Krt CR Update!
#New weight balance
#New collider mesh
#rear coaster modified
Hi new KRT CR UPDATE!
#Suspension update (again ^^) i found something!
#New KRT setups
Better physic!
Attached images
KRTCR susp 2022.jpg
Double parallel? I will try in September
YEs, some Kartcross have this config Wink More stability!
Hi there,
New krt cr update, i hope you like it, that really better now!
Attached images
krtcrpv3.png
krtcrpv2.png
krtcrpv1.png
Cool ! Hope to try it next week!
Is it normal to have front upper wishbone longer than lower wishbone?
I have not reference, so i try to make it with the feelings ^^ if you have some reference, i can make it better, for sure!
I'm so stupid, i've found this! so i'll try to fix that asap Big grin
Attached images
krt3.jpg
krt12.jpg
https://www.mikadoracing.com/index.php?action=DETAILLER&id_annonce=1958745
On most race car the upper triangle is smaller than the lower like in your second drawing. The anchor point are usually V shaped like a hull in a boat. The main effect is to add more negative camber on compression. The opposite might exist but I don't know any example.
Sometimes you can have two similar wishbones like in your first drawing. No camber change on compression.
IRL the 3d effect with the steering linkage change wheel steering angle depending on compression usually it is unwanted effect. I don't think LFS properly get that.
No you are not stupid! You are doing a lot with not much!
I begin to work on these parts
Attached images
suspension pv1.png
I've found this video who explain difference between different suspension about kartcross: , new update under release...
I have found some informations, physics better than ever, suspensions are perfect. This kart probably finished before july!
Attached images
krtcr.png
krtcr2.png
krtcr3.png
krtcr5.png
krtcr6.png

KRT cr
(103 posts, started )
FGED GREDG RDFGDR GSFDG