well since i have told you about the engine on the publishing thread, i have actually went and made an engine in the editor, i was going to maybe try to record something send a youtube video of it here of my engine but i couldnt find the time for it, but since you said just send it here, i have attached the engine file.
well about this engine, its turbo spools around 1.6k rpm on the 6th gear but you start getting noticable acceleration around 1.5k right before it spools. it shows 790 nm at 1.9k rpm due to editor limitations, but one cool thing about these vw group diesel engines is that they do kinda make more torque than the specs indicate if they have a large flat line in the torque curve, this can be seen especially in the 3.0 tdi where one of the 450 nm versions are rated 450 nm flat for a wide region while a marine version of the same engine with same outputs is rated at 500 nm at a single point, so this can be applied to this engine too i think, the q7 has this (or mabe a different version with small edits?) engine rated at 760 nm 1800-2800 rpm iirc so i think this is not really far from realistic, it pulls around 0.03g more than it should until like 2.2k (tested with a 730 nm n/a test engine to test the torque curve i had in my mind)
also while testing, i found the factory gear ratios, im gonna paste them here
Very nice mod indeed, feels good at when throttling..but feel like cutting early on redline, may need more redline at 7000 like real version, overall engine tweaks.
Also needs default skin i noticed it dosent have any.
rest is pretty good, well done
its redline is right since this is a diesel engine
sssoooo i tested the update, its actually slightly underperforming compared to my rb4 test mule, so i wanna deliver a small update KEKW basically thinking that it was pulling way too hard under 2.2k, i compromised on spooling a little bit with my earlier engine (by like 50 rpm later), turns out i didnt need to do that after seeing it on the mod, so i pulled the spool back like 75 rpm and i think this will feel perfectly like i envisioned it in the beginning PauseChamp
also you mixed up the reverse with the final drive, reverse is -3.403 and the final drive is 2.895 can you please update again? also thank you for including my engine in your mod peepoHappy
edit: you can also increase braking force to like 2000 nm with like 67-68% brake balance, this will improve the braking of the base setup greatly (i use 2100 nm and 66% on my setup to maximize the potential)