Let me be clear up front that I know (or at least I think) that this is not a problem with the test patch itself, which is why I am posting here rather than in that thread. I am only noting that for information.

Unfortunately, I am not sure exactly where the problem is, so I was hoping for a suggestion before I spend a lot of time barking up the wrong tree.

Got the G25 a couple of days ago (love it) and everything was working fine using the stick with auto lift/blip turned off.

Last night I was looking around the forum and saw all the neat things that had been included in the test patch, most notably fixes for the audio, so I downloaded and installed it.

Since then, the clutch does not seem to be working properly. The clutch is recognized in the game in the horizontal list of axes under axis 4/Y axis. I see the yellow bar moving as expected when I press the pedal. Axis 4 is assigned to the clutch in the config on that screen, but I do not see the vertical indicator in the bottom right moving with the pedal.

I have tried doing the re-calibrate axes thing, to no effect, but so far not had time for anything else. I am off to work right now and plan to get back into it when I get home tonight.

Would this issue be related to the scripts that were introduced with the patch (I had not previously edited the default ones), and that's where I need to make adjustments? Or do I likely have some other config issue?

Thanks much for any input. (Ha! Pun!) ;-)

lyd

here are my scripts for the g25, and everything works in U30. just replace the your scripts with the ones in the zip file...figured that would be the easiest way to test

the most important file to replace is the autoexec.lfs file. it has 90% of the setup info in it. next are road/paddle/sequential. The rest of the files (the individual car files) have little to no changes in them (yet).

Quote from lyd :

Let me be clear up front that I know (or at least I think) that this is not a problem with the test patch itself, which is why I am posting here rather than in that thread. I am only noting that for information.

Unfortunately, I am not sure exactly where the problem is, so I was hoping for a suggestion before I spend a lot of time barking up the wrong tree.

Got the G25 a couple of days ago (love it) and everything was working fine using the stick with auto lift/blip turned off.

Last night I was looking around the forum and saw all the neat things that had been included in the test patch, most notably fixes for the audio, so I downloaded and installed it.

Since then, the clutch does not seem to be working properly. The clutch is recognized in the game in the horizontal list of axes under axis 4/Y axis. I see the yellow bar moving as expected when I press the pedal. Axis 4 is assigned to the clutch in the config on that screen, but I do not see the vertical indicator in the bottom right moving with the pedal.

I have tried doing the re-calibrate axes thing, to no effect, but so far not had time for anything else. I am off to work right now and plan to get back into it when I get home tonight.

Would this issue be related to the scripts that were introduced with the patch (I had not previously edited the default ones), and that's where I need to make adjustments? Or do I likely have some other config issue?

Thanks much for any input. (Ha! Pun!) ;-)

lyd

Nope it's as simple as you're using an axis as clutch when you've set (or it was set by the patch) it to clutch with a button (above the button/axis assignments)...

Quote from bbman :

Nope it's as simple as you're using an axis as clutch when you've set (or it was set by the patch) it to clutch with a button (above the button/axis assignments)...

Bingo. As my grandma used to say, if it was a snake it would've bit me. I knew it was going to turn out I was just being a dumb-ass and missing something obvious. ;-)

Thanks for the pointer.

glyphon, thanks for the scripts. They'll be a good template for my plans to move some functionality over from the logitech profiler.

lyd