Hi guys, just in case anyone is interested and it hasn't been reported before already: The ECCI pedals with connector for the black Momo work also when connected to the G25 wheel. Only slight modifications to the connector are required: You have to unscrew that cable support thing at the bottom of the wheel and pull off the screws from the connector itself, otherwise it won't fit in. However, all this can be easily redone in case of warranty claim is required. Then the break axis has to be inverted in software and that's it.

Note, that I do have a 2-pedal version only, so I don't know if a clutch pedal would work as well.

I have emailed ECCI about making the clutch compatible with the G25. I don't currently have a clutch, but when they can offer me a solution, so that I don't need an additional USB controller (i.e. it all plugs into the G25) then I will be ordering one.

Until then I am using the Logitech pedals for the additional clutch even if the other two pedals aren't as nice.

Quote from tristancliffe :

[...] I am using the Logitech pedals for the additional clutch even if the other two pedals aren't as nice.

Indeed those pedals are not nice at all. I think Logitech made even a step backwards with the brake pedal. Even though the pedals got more robust compared to the Momo black ones, they removed the second spring from the brake pedal, which at least gave a descrete pressure sensitivity at one point. Of course this is nothing compared to the smooth PBM of the ECCI... but well, was better than making it behave just the same as clutch and throttle.

By the way the reply to my ECCI email was

Quote from ECCI Email :

Hello Tristan,

Until we have a G25 to look at there isn't any way for us to know what is involved in making these connections. As soon as we can get a G25 we will work at developing a solution.

More questions let us know.

Thanks,
John Pribble
Extreme Competition Controls, Inc.
[email protected]
www.ecci.net

Yeah, they seem to have a template for that question already. The response I got spelled almost exactly the same

But actually this is good news. If a lot of people ask for this, they hopefully will offer a solution soon...

if the 2 other pedals on the ecci set already use the same pots as the g25s the clutch will also use them

in other words all youll have to do is some simple rewiring to a 9pin sub d connector