I was moving my DFP pedals around today to try find a suitible storage solution when im not using them, and decided a nail on the wall would properly hold it up off the floor so it doesnt get damaged, and i noticed the pedals felt alot more comfy and suitible in that position (The overhang Pivot type).

So i set my pedals back up in LFS, and it was alot better, the only trouble was the pedals were reveresed (Gas being the Brake pedal and the brake being the gas pedal).

So i was wondering if it was possible to Swap both of these pedals around in the actual casing so it would feel better when overhanging?

The only problem I forsee is that the pots are on the insides of the pedal axis and swapping the pedals would put the pots on the outside. You wouldn't be able to push the pot back down in its holder. I don't know if you can pull the pot off and put it on the other side of the axis though.

Where and how the pedals sit in the base aside from the pots are identical.

If there is enough wire, you can unplug the wires, and put them on the opposite pots. I am not responsible for wire breakage, but it does work

You could do that, Fordman, but the actual pedal (shape) will still be on the wrong side, ie, the higher and smaller brake would be the throttle, and the longer narrower throttle would be the brake. You can do this right in LFS anyways with axis selection. If I'm understanding you correctly.

Quote from mrodgers :

You could do that, Fordman, but the actual pedal (shape) will still be on the wrong side, ie, the higher and smaller brake would be the throttle, and the longer narrower throttle would be the brake. You can do this right in LFS anyways with axis selection. If I'm understanding you correctly.

Dont you start with a "size matters " opinion ROFL. But your right, but, when your racing, do you really feel the size of the pedal? I don't. All I know is its in the right place and feels right " Oh my, thats the answer to all my questions ROFL "

I actually tried it, mounted it upside down, and reversed the axis's in LFS and such.

And yeah, it feels really weird, with the gas being to far forward :/

Wellll.... I had kind of a hard time gathering my thoughts to respond on that, Fordman, ROFL. But djgizmo68 said it for me. The throttle pedal would be too far forward compared to the brake by doing it that way. It would not be "in the right place and feel right".

Did you finally get it? I am interested on doing that

Edit: Is not necesseray, I just ordered a G25