Black momo pedals- oh and i have found a tweak when fixing them to make the fix last longer if you get what i mean
illepall
when applying tape to the pedal- apply a little too much so that when the pedals are back together the accelerator pedal has a bit too much friction.
Now untighten a couple of the screws at the back of the pedal base and the accelerator should move freely and last as long as it would if less tape was applied.
when the pedals eventually start spiking again- all you have to do is tighten the screws slightly on the base unit and hey presto problem solved (for the next month or so at least) now repeat until there is no travel left in the screws, where the obligatotory dismantling must take place again!!
hope this helps and sorry for the slight off topic post