Hi, when i wanna start my pc (so i press tje pwr button) and nothing happens, i see my mobo LED burning and all my case switches are correctly putted on the thing they should be, can anyone help me plz?

Do you have a case speaker plugged in? If so, what noise does it make? Tried doing a "minimal boot" with 1 stick of RAM, CPU, GFX and no HDD's etc?

hi, i have a case speaker plugged in yeh, but the pc doesnt boot so i cant hear a thing
if i push my power button it doestn react, im a bbit scared now

so is my mobo broken?

No picture, no beeps? Try and reset the bios. Look in the mobo manual for instructions.

no nothing, i know how to reset the bios but it doesnt make any sense if the computer event wont fire up, i guess i have to buy a new mobo?

You have to open the case and short a jumper. Usually when there's no beeps, it's the cpu that's faulty. Also make sure all add on cards are properly seated in their slots. Do you have an analog modem card? They're known to cause the problem similar to yours if they're broken.

ok, everything is good into their slots etc, so myy CPU is broken?

Have you tried removing everything like i said? you should only need a CPU and some memory and a power supply, tbh

yep i did a test and i took my mobo out of my case with only gfx, mem and cpu , nothing..

Is it plugged in? Power supply on?

Tried using a screw driver to short the power pins?

tristan what a question? OFFCOURSE
yes Jakg i did
should i say my AMD X2 4600+ goodbye?

Any sparks or anything? If not then the board sounds dead - if it's not shorting on the case or anything.

Got a spare CPU or mobo of that socket to try it with?

no i have nothing spare to test, and i'm not feeling to bring it to a store either

a friend of mine (almoust as geek as Jakq(sorry) ) confirmed my mobo is dead, well im gonna order a Zalman cooler cause that was the cause, my mobo didnt get cooled enough

A mobo you never pushed wouldn't boot because it died of overheating.

That's... odd. I overclocked the crap out of my old board and the chipset wouldn't break 32° under load, i can't see how you could kill a board with it tbh.

well, me neither, but its broken for sure, ill check it at work to be sure, thx for your help all

Just a little hunch, but, the fuse in the power cord or any socket adapters hasn't blown has it?

I bought a new power supply once, only to find that it was just the fuse that had gone. As silly and pointless as it may seem, this is often the first place you should look before you buy anything.