Just finished modding the shifter of my g25 by shimming the spring and ball to make it a bit stiffer and adding a rubber band as shown on the rsc forums.

now my sequential stick doesn't work, and the sequential LED on the left of the D-pad doesn't come on. H-gate mode works perfect as intended with the mod, but it just wont recognise sequential mode

any hints before I open it up again?
thnx

mine has the same problem, although i didnt mod it, i cut it in half (didnt touch any mechanicals though just cut wires), im hoping its just something caught in the sensor....

http://forum.racesimcentral.com/showthread.php?t=299371

Check that link however mate...it notes that it may not work with those mods you did...should find the info you need

thanks, I guess I'l try the 'strut' then

Quote from Osco :

Just finished modding the shifter of my g25 by shimming the spring and ball to make it a bit stiffer and adding a rubber band as shown on the rsc forums.

now my sequential stick doesn't work, and the sequential LED on the left of the D-pad doesn't come on. H-gate mode works perfect as intended with the mod, but it just wont recognise sequential mode

any hints before I open it up again?
thnx

There is a "lever switch" that must be in the "open" position for the sequential mode to work. You must have damaged/jammed or altered this switch when you modified your shifter. The Sequential LED comes on just as you start turing the Sequential/H shifter Knob CCW because the switch is "made" when the Knob is in the "H shift" mode.

thanks, I made a 'strut' between the two metal plates from a strip of aluminum, works fine now, more realistic feel and less wobbly. shifter feels more solid now with more resistance.
problem solved