Right i'm not sure where to post these so if they're not in the right place then mods can move it.

Anyway, i'd like to do a race with one of my tracks at autocross. The problems are
1. When I start the race I can't make all the people go on the start line. How will I make all the racers start at the same time?
2. If i want to practise, how do i set it to practise because when you create it, it says the amount of laps you want to set it to and it's a fixed number of laps that you can't change to practice.

Anyway thanks for any help
Mike

If you're talking about an "autocross" track on Blackwood, there's no way to do what you want. There's a limit of one lap, one car.

If you're actually doing this on the autocross map then there shouldn't be a problem. You can run as many or as few laps as you like, and there's quite a large start grid (I had 9 guys on my autocross server last night running a figure 8 track). You just need to make sure that you have the different sections setup correctly with a start and finish line, multiple checkpoints, etc.

start positions...

For multiple start positions, use the default starting position, load up an empty blackwood carpark or autocross arena and restart the race to find out the position of the default start.

Laps...

/laps=0 0 laps is practice.

Not sure how relevent that is, but there you go

How do you set it to 0 laps though cos when you get to 1 it won't go lower.

type /laps=0

A bit more info..

to use the default start position, just delete your self-made start object (the big green arrow that shows up when you press S in the autocross editor.)

doing this means that more than one racer can start the race at the same time. Where they show up is usually in front of the start lights.. but do what the first reply said and restart your race to see where it puts you.


When you type /laps=0, you have to be in the race setup screen, i.e. where you go after you "end race"

HTH
-Carl