Would be great if it is like TDU but is still a 'realistic' game. Hopefully it still has the tuning features and isn't just a basic racer.

Quote from Nathan_French_14 :

Luke, what was the name of the wheels you photoshopped onto my car? Think I might put them onto my potential buy list, as I think they suite the car really well especially in that colour.

How do you think it looks?

They were Rota Slipstreams (Spoon Sports SW88 or Desmond Regamaster EVO's)





This will put you off the Rota Slipstream's (apparently this wheel could have been hit into a curb which explains the damage lol)



But yeah I think they suit the car really well, especially in a gunmetal colour.

Quote from danthebangerboy :

Coilovers are here, yes yes oh yay!

Now, do i give it a subtle drop that gives a nice compromise between ride comfort and looks, or do i just wind the whole lot down and totally deck it, im not sure

All the way down

Otherwise you should have saved some money and just got springs?

Quote from Fuse5 :

a lot better !
Ben Kama is awesome
He's made another epic bootleg ( http://www.youtube.com/watch?v=JSK2yj_udY8 ) and he's an overall cool guy.

But for now
I shall counter with this
http://www.youtube.com/watch?v=QIfUCze3L6M
High Contrast - Not Waving, But Drowning (feat Lung and Jessy Allen)
from HC's new LP \o/

Yeah I heard that bootleg in your, Dog's don't know about my mixes! (was that the name? lmao?)

Lol, ok it's 'mainstream' but it's not that bad

Better?

http://www.youtube.com/watch?v=BchIFuJGl-4

Quote from sam93 :

And a VTEC engine doesn't actually really produce much power at all compared to in VTEC etc...

Yeah the engines I used to build for a company I worked cost £14k finished, but was a 2.0 redtop engine and the engine would munch a VTEC lump for breakfast! Yeah, had a **** load of work done it etc, but had 220bhp at 3500rpm and that would rev out to 9500rpm. Figures was 290bhp which didn't really matter when the torque figure was at 200ft lb of torque.

Tbh a stock c20xe would get raped by a k20, plus it would cost more money to get it even near a stock k20..

Nice 206, would change the wheels personally.

Got my car lowered today

Quote from Jakg :

Never used to be keen on 350Z's, but these videos have converted me recently:

http://youtu.be/7iQM9v8Al08?hd=1

http://youtu.be/GKqzQg7MHC4?hd=1

Nice videos

http://www.youtube.com/watch?v ... JYzWI&feature=channel

http://www.youtube.com/watch?v ... t6Ygo&feature=channel

Quote from pb32000 :

Yeah the Golf and Scirocco are both still uninteresting

Didn't like any of the BMWs I could get for the same money. I wanted something with 2 seats, a few toys, and realistic to fund. Test drove a couple of S2000s but the insurance is killer (I'm 24 with only 2 years NCB). Z4s and Boxsters are too expensive, MX-5s are too slow etc.

This is a lovely example with reasonable mileage, pre 2006 so not in the £445/year tax bracket (although that does mean it misses out on the slightly newer engine ) and "only" costs £200/year more than the Golf to insure...

I was only kidding with the BMW lol..

Nothing wrong with the 350z, defiantly better than the glof.

Quote from pb32000 :

Whyyyy?

Squeaky-clean dealership shot...

Because you should have bought a BMW!!

Quote from bmwe30m3 :

Because 350Z is boring....

As above.

Pretty interested in this, have played quite a few P2P and F2P mmorpg's.

The models and animations look great.

I'm up for testing too

Met up with some local 106 owners.

Well here's my kinda finished vector 106.

Last edited by lukelfs, Thu, 16 Feb 2012 15:53.

Nice work

With drawing the lines do you use the pen tool that says, Draw bezier curves and straight lines?

Also how do you colour in each section?

Quote from Raito :

Looks good I was drawing vector cars in PS too, that Skyline R32 in first post is PS, but then i tried InkScape and after couple of time it was way much easier and quickier to draw there. Now Im working on Mistubishi Lancer Evo IX, it's currently about 80% done (outline preview):

That looks great, I can't get my head around that program. Don't suppose you want to make a video tutorial

Working on these atm,

Quote from FRZN-95 :

My friend just upgraded to GTX 560Ti SLI , and there is weird problem in BF3.
Both cards perform lower than a single 560, so he is like *** i wasted money on this shiet and they perform worst than a single GPU....

Any ideas guys ?

Are you sure the SLI bridge is working? Have you checked with the SLI indicator (in Nvidia Control Panel)

Has he got the latest drivers which have the BF3 SLI Profile..

If none of the above works, what CPU does he have and what resolution does he play in? (Bottleneck???)

Quote from Raito :

Thanks

Im using InkScape, it's free Some effects are then added in PhotoShop.

I just downloaded it to try it but it's so alien to me I didn't know how to do it lol.. using Photoshop now to make my engine bay

Quote from Raito :

Here we go I hope you will like it a bit at least

Damn didn't think you'd even do it! That is awesome! Thank you

What program did you make it in?

Looks pretty good

Don't suppose you could vectorise my car?

Heal LX6
Hurt MRT

Old pics.. Morettes FTW. Yes I am a chav.

Heal FXO
Hurt FZ5