just a small project i was messing around with

Thanks for the feedback. nah it wasnt after turbosmooth.. but then again it is my first model and me being a detailwhore i wanted to make sure i had enough geometry to make sure the wheel/spokes looked like they should look

Hey Amynue.. not really a request but just asking if it would or could be possible to see in the next release the Weds Kranze LXZ wheels.. if so id love to see them

Quote from Gills4life :

But it's just ear rape. Seems like a waste of time trying to replicate the sound from an engine in a car that has a different amount of cylinders and therefore produces a much different sound, when whatever I try sounds like a ton of bees en masse.

Use lfstweak and give the XRT a couple more cylinders and then raise the exhaust volume. I think that will give you what you want!

:/ but im looking for the sound so when im on drift servers cruise servers i get the same effect when i cant use tweak

hey guys not sure if this is the place to put this sense there is no 3d section so ima throw this up here..

this is my first Model i have actually done from scratch.. i got alot of feedback about modeling and was told to stay away from wheels as my first model. but i went ahead with the idea to do a wheel first and this is wat i have got done with about 6 days of work spread out over the past year because of PC issues holding me back












Comments & Crit. accepted

Also i know that the outer edge of the spokes needs work still with PC issues i cannot continue on that part atm.

Quote from Gills4life :

I do have that bov sound on the Nissan200sx engine file for the XRT but can't really replicate the engine sound without ludicrous amounts of clipping.

can u do your best? i like really want this sound as 2jz is my favorite motor.. i dont mind clipping as long as it sounds as close as possible to the 2jz

Hey gills is it possible for you to make a MK4 2jz-gte Single turbo sound for the XRT

with a nice BOV like this one
http://www.youtube.com/watch?v ... oTh1g&feature=related

hopefully the Engine sound sounding really close to this one


i know there isnt much of the sound there but u can get the idea i hope

here is another good video for sound comparison http://www.youtube.com/watch?v ... boyqY&feature=related

Quote from dynofiend :

Very nice work.

I always prefer textures to look a bit more worn and weathered, but that's just a personal/realism thing for me

but he was going for that Fresh paved fresh new brick look like the course had a major overhaul

and this mod is illegall on the LFS forums because its modifing the original game files other then .dds and skins

Quote from the_angry_angel :

You need to add an image with the source pointing to the URL.

No idea how you'd go about doing so on moonfruit, but the html would look something like this:

<img src="http://www.lfsworld.net/isonline.NickName.gif" alt="Nickname online status" />

i know this post is old and what not but sense then i have moved on from moonfruit to e107 systems... but your code that u posted do i put the username in those 2 spots?

nevermind figured it out

Last edited by JDMKING20, Fri, 19 Nov 2010 06:00.

Quote from Silverracer :

To get rid of the skin, you've got to delete the skin from the "skins_dds" folder. The skin will have the same name; it'll have .dds instead of .jpg.

If you've changed the engine sound using shift+a for a specific car (i.e. XRG), LFS will use that sound for all XRGs. You cant have your XRG using a specific sound and another player's XRG having another sound at the same time.

and you can have a diff engine sound they everyone else... u just have to go through each racer and change their engine sound..

example
Racer1 (you) - (custom engine sound)
racer2 (friend)- you would click on his name in the connections list hit Shift + a then select a different engine sound for him and then shift a again to close the menu.. and boom 2 drivers with 2 different engine sounds

Hey Lynce.. here is yet again another mirror for your packs.. april august and june's

http://www.drift-mechanism.info/download.php?list.2

all credit goes to the right-full owner just hosted as mirror

Quote from TehPaws3D :

It appears I have no image editing program that can open DDS. ... So.. Can anyone point me in the right direction for opening something seemingly simple?

paint.net works it has a built in dds filter

i used to have a V8 engine sound that had a supercharger whine to it... idk if it was CSR but it wasn't gear whine that made the whine as it didn't make the noise when u let off the throttle... if anyone knows where i can find our post it here i would be greatly appreciated

now before i get flamed for this post i have lfs patch v.. im just looking for the bespoke program.. if anyone still has a copy of it laying around somewhere. would u please host it on megaupload or something.. i really want it

Quote from morpha :

Did you even try to comprehend the error message? Sure doesn't seem like it

rstmin is too large/long, try 300 and if that doesn't work, try less.

im not a coder im just trying this because no one else i know can do it.. so im trying. so i didnt know what it was

Ok so im trying to get a dedi host up and running again, but every time i try and start it up i get the out of bounds : rstmin error.. my dedi host code is below if anyone wants to take a look and see if u can find the problem =[ i an getting frustrated..

Quote from RevengeR :

Hi there. Beside racing in nFinity eSports, I drive under a hungarian team in the Hungarian S2 League. Freshly made, called Copyright with 4 hungarian members, norbi, the Talmacsi brothers and me. Since we are not skinning pros we have a hard time making skins and most importantly they are nowhere near the standards of the team.
We are looking for a skinner who could help us out with the skins. Unfortunately all we can offer is putting it on a car thats driven by the multiple Hungarian LFS and Seat Leon Supercup champion Norbi Kiss, and 2007 125ccm World Champion Gabor Talmacsi.
If you feel you are the right one for the job, you can contact me via pm or msn.

ps: oh yea, and we are looking for a 'serious' skinner, not paint warriors

rev

i am apart of Design-Dudes.. give me a day or two and ill have something for you.. Pm me with details on what your looking for on the skin

We are currently accepting applications

www.driftmechanism.us.tt

submit your applications here

Drift Mechanism
2010 Drift Performance Team

Calling all Drifters,

Drift Mechanism is looking for drifters of any skill level, if you want to
represent a great team, and learn to better your drifting Then Drift Mechanism
is for you. we have 2 different Team skins to separate the rookie drifters
from the pro drifters, We will have our server back up in a few days.

Drift Mechanism has a full Team website for our members and the public to
come hang out and chat about LFS. www.driftmechanism.us.tt

Team Leaders
DMxRabbiTº
DMxSidewayZº

Team Manager/website owner
DMxF-Logicº

Server Administrators
DMxXззdº

Video Editors
DMxP-unitº

Team Members
DMxΣA7Θº
DMxLuciferº



Also i would like to say this thread is not a place for arguing, if u wanna argue take it to PM

Last edited by JDMKING20, Fri, 8 Jan 2010 18:12.

Quote from SouvlakiTheBest :

OK dude AND thnks FOR your REPLY!!!! I m gonna WAITING!

well if u would READ you wouldnt have to go thru being told over and over again

Quote from MMMaaaXXX :

Thanks man! I'll be waiting

ok i uploaded a few of our tire treads to the forums ur wecome to come check them out and see if we have something you are looking for

Quote from Gentlefoot :

You can get the data off that other HD using a cable you can buy that provides a power supply to the hard drive and data connection to a USB which you can connect to another machine and copy the data over.

Something like this - http://www.ebuyer.com/product/130517 - although you can get better ones that work with SATA too.

yea but i dont wanna get it off thats the thing.. i didnt wanna lose it buy having to reformat to install a new hdd... thats was my only question.. i wanna keep my data on that hdd

Quote from SouvlakiTheBest :

The forum is full of... you know nothing about LFS....... And WTF is nitto racing stuff.......????? Its just so annoyng drag something..

it is a TEAM WEBSITE as we are not ONLY a TEAM on LFS we have other GAMES we PLAY, and as my previous post said it STILL A *WIP*, we are still in the process of moving files and S*** so hold up and wait, lfs files will be there soon

Quote from SouvlakiTheBest :

Nice one but empy for normal use of LFS......

What?