Not bad, but they are a bit big... and you can't see the gear..

it need a fuel gauge at least (& why not gears n°), you can work on the alpha channel to give it some transparency...

This kind of gauges for racer is a good base.

By the way, here is one more EK9-like, a try with "cobalt-look".
Don't worry, different look will come soon, there is a bunch more of work needed for some of my next series...

Attachements removed for now, some improvements in the work.
Back soon, apologies.

Man, now in the folder "Gauges" I have only RB4, XFG and XRG. But in game doesn't work..

what could be?

btw, could you do some for uf1?

Quote from BoyGTA :

btw, could you do some for uf1?

Any suggestions are welcome, I got an idea for the car, but I didn't get very far with it...(ek9-type again)

i've noticed something about the turbo gauges... now they kind of measure negative pressure too... just like manovac meters... but it only happens on AnaGauges... in the stock ones they remain the same...

Hi, ive read all pages on this still trying to figure out how to make this work.


"InSim : password does not match your multiplayer admin password"

Thats the message i keep on getting annoyed with. Got english language and
this
OutGauge Mode 2
OutGauge Delay 1
OutGauge IP 127.0.0.1
OutGauge Port 30000
OutGauge ID 0

So now what should I do ?

Edit:Now for some reason a reboot made it work hmm. Well Now ima go on reading about how to make other gauges work ^^

dont work too at my LFS

This ist my Message: InSim : first byte in packet does not match size

edit 2: Set insim is useless vortech says, but dont work anyway

Pls help

Quote from Dudles :

i've noticed something about the turbo gauges... now they kind of measure negative pressure too... just like manovac meters... but it only happens on AnaGauges... in the stock ones they remain the same...

I was about to mention that, actually.

I've noticed [after modifying a Blitz dial to use for boost display] that if the gauge is marked in the same steps and units in both boost and vacuum, it's accurate [again, case in point the Blitz gauge reads 1 Bar vacuum in the same space it reads 1 Bar boost]. Hopefully that made sense.

Work Now, awesome +1.

But how can i turn off the Gauges in interior, and how i can turn off the Main Gauges at the Car view ?

Thnks

If you talk about the in-game gauge in chase view, it seems to be permanent.
To disable/enable ana-gauges one just press del key (you may to insist).

Multiple scale would help a lot to make more difference in the "steps" (would be great for the other gauges also)... but since Redrum stop supporting this addon, we just can wait until someone else take up the developement... or leave with it as it is ...

A funny fact on turbo gauges btw, everytime I make it bigger than 128x128, the needle f*** up ... (using any of the remaining layers won't do the trick, needle can't be larger than 128x128 for turbo only....).

Hi...

A last throw of ek9-like,
First, FXO gauges 2 variants ("cobalt" & white)...
+ UF1* & XFG.
Also, some various turbo gauges (small pre-release pack).
Have a look to the readme to know how to use them.

Comments would be welcome.

More to come.

all my gauges works with 1.0.

*updated UF1 version is available Here

i dont understand how to install it

i cant work out how to make my own gauges? i tried having a transparent background, but it still has a black box around my gauge :S. i use photoshop to edit.

here is an example of what i mean

Check the alpha channel you have defined for the .tga image you used. It has to correspond with the areas you want transparent. It's in the "channels" panel (usually grouped with layers and paths).

thanks just solved it... now i have an issue with the needle. posted in the other thread with the final version of this addon

can someone pls tell me a step to step guide to how to make the gauges work on lfs version z. all ive dun is put wat was in the zip file into the lfs folder and that was it. i wanna kno how to make it wrk pls also in the gauges folder i made one for fbm and put mph in it not kmh so how do u make that work

anyone???????????????????????????????????????????????????????

Quote from Underene :

all ive dun is put wat was in the zip file into the lfs folder and that was it. i wanna kno how to make it wrk pls

Read the instructions on the very first post, specifically this bit:

Quote from First post in thread which contains instructions :

- start LFS like this target in your Link "C:\GAMES\LFS X\LFS.exe" /insim=29999

Quote from xaotik :

Read the instructions on the very first post [...]

Target in shortcut is not really required... (never had to make this myself).

Let's do it in 3 steps:

-Make sure to have the files (.tga + .ini) in the right folder.
ex: ...\Liveforspeed\Gauges\GaugesXFG .

-Modify these lines at the top end of your cfg.txt in LFS root folder.

Quote :

OutGauge Mode 2
OutGauge Delay 1
OutGauge IP 127.0.0.1
OutGauge Port 30000
OutGauge ID 0

-Place the d3d8.dll* file in your LFS root folder.

Now if you follow these 3 steps, I don't know how it won't work...

*The one for version 1.0 (400kb)... it is provided in almost all my gauges...

There's 2 threads about analog gauges (1.0 / alpha)... it could be confusing...
Most of the content uploaded here are 1.0 friendly.

yay it works thank you very much

3 steps...

You welcome...

i have a request:

-mph gauge

-mphneedle

-rpmgauge

-rpmneedle

-shiftlight



I have made those images and for the rpm gauge can someone put a digital thing to show what gear you are on and can they put it like between the bottom left and the middle. Also could someone make a fuel gauge for it as well

Can someone join em together to make an anolog gauge pls for the fbm. (beware i would like it in mph)



I would be very grateful if someone could do it pls

Quote from 1303s_vortech :

3 steps...

You welcome...

u kno the ferrari one... could u make it into mph by anychance as well??

is the ferrari one gears supposed to go 2 then 1 then R then N

You have all you need (ok... except fuel) already.

You may have a look at the attachement.

(All credits goes to the soft maker).

I only work from scratch now...but if you still need help, tell me.

Quote :

is the ferrari one gears supposed to go 2 then 1 then R then N

eh?... what you mean?

i mean when the car is in neutral, the letter on the ferrari gauge is R and when in reverse it is N that is what i meant