Quote from CRC Snightlo :

The Race yesterday was a realy nice one! Two Safetycar Periods made the race realy intresting and the Race Admins have done a great job there. Full Race Reports could be read in the here in the PLZ Forum http://www.playerzone.it/plz-t ... ew=wrapper&Itemid=175

The next race will take place at Kyoto National Reverse with the FZR

Yes, was a funny race.
I make some error and i pay for this.
Compliment for your second position.

I've a problem ...

If i start my server with parameter:
//ipxx.xxx.xxx.xxx
it work and it's visible from lfs hosts, but i can't add it in my insim because there's not an ip.
My external ip is: 79.19.122.186, i've two pc with a router and the pc where lfs start has the ip 192.168.1.20
If i use the parameter
/ip:79.19.122.186 server don't start
but if i use
/ipo:79.19.122.186 it work and it's visible in lfs host.
But when i go in insim to add my ip, the 79.19.122.186, it dead and don't connect !
Why this ?

I think is a problem with the ip.

Can someone check a direct connection to ip 79.19.122.186 ?

the server name i Demolition Park.

Quote from Shadowww :

http://www.lfsworld.net/ (you MUST login) > Racers & Hosts online > Tab "Insim Relay"

Yes, i've allready insert e new row there, whith my server ip, insim port (29999) and admin pwd but i can't see it in remote.

I can see it immediately or after some our ?

Thanks for the help.

Quote from Shadowww :

Because it is not connected to InSim relay.

Thanks mate, and what i need to set to connect it in InSim ?

Quote from Shadowww :

http://lfsworld.net/remote/

I receive a blank page ? Why ?

Up: ok it work.

But why my server don't show here ?

One question. There's soma software that permit to control the server in remote or in another pc where lfs is not installed ?

Hallo, i open this thread to inform u about I'Cup 09.

The official web site to sign up, see standings and read rules is this:

http://www.playerzone.it/plz-t ... amp;id=149&Itemid=176

Any driver can join for only one race, too.

Races are long 1 hour, with mandatory pit (change tyres) from 20 to 40 minutes of race.

Next race is on 8 april, at 21.00 (GMT+1).

U can join after registration in official site.

Next race is on AS5R with the XRR.

Prequalification of the next race will be closed at 24.00 of 7 april.

GOod, it work but i've i problem.
He don't save the position.
So the rank is __/__.

In config file i change only pwd and i add this in trackinfo:track = AU1
len = 3.4
car = RB4
MaxLapTime = 3.00.00
split1 = 0.00.01:0.10.00
split2 = 0.24.00:0.48.00
split3 = 0.20.00:0.38.00
lapTime = 1.10.00:2.00.00

I've to change some other parameter to memorize the rank ?

Thnaks in advance.

Quote from zeugnimod :

The server automatically becomes S1 when you use a S1 car on a S1 track.

Thanks mate !!!
And why i can't find it with my lfs game in the server list ? Is'it right ?

Thanks Angry Angel, why this now ?

updated: interesting !!! the server is online, but in S1 !!!
Why if a use this in my config.cfg ?

// demo/s1/s2
/mode=s2

In lfsworld, it result in S1 ! Why this ?

After reading all instruction (good work mate) i try to start with dedicated host a server.
From the panel i receive "status online".
If i start LFS and i try to connect in local to 192.168.1.28 i can connect to my server and game.
But if i find it online, in lfs world, i can't find it.
I've opened in router 63392 in tcp and ucp and 29339 in tcp.
I also set firewall that permit lfs.exe and port 63392 and 29339.

Which is the problem ?

I use a specified IP (my external) and if a use o not ( xxx.xxx.xxx.xxx) don't change anything.

The server now is online, the name is "Demolition Park", autocross, can u see it ?

---

updated: interesting !!! the server is online, but in S1 !!!
Why if a use this in my config.cfg ?

// demo/s1/s2
/mode=s2

Last edited by michele0676, Fri 3 Apr 2009, 15:35.

He all, i'm PLZ-mc0676.
This evening i take the place of my friend Fiore (PLZ-Black) and i will race with a FXO.

Good luck to all.

Thansk Black !

Tdougan the effect is immediatly with SHIFT+C ?

Thanks all for the reply and for other experiences.

Yes ... he recalibrate the wheel but the next race start ... it happens again.

He all,
one my friend that not speak english very well has a problem with his G25.

During the start, with the XRR, when the car starting "lost the rear" and he try to correct then the wheel (G25) lost the center.
After his new "center" is about 15-40 degrees moved on left or right.
This problems happens about 4 times on 10.
He use last driver version, 5.04.
The problem actually happens on FE4 (Fern Bay Black).

Somebody with the same problem ? Any solutions ?

Thanks.

Quote from DeKo :

nah, im terrible at explaining, but with wheel compensation at 1, you can just leave it at 900 in the profiler but LFS uses only 450 deg in game automatically.

Thanks ! This is fantastic ! In this way i don't need to change it in logitech profiler every time that i change a car !

Quote from DeKo :

i use the profiler but some dont, G25 but its near enough the same, settings work spot on for me, will be a good starting point at least. These settings in LFS, to explain, mean that in the road cars you get 900 deg, but in cars that dont use the full 900, like the BF1 for example, turning the wheel in reality still turns the wheel the right amount in LFS, hard to explain.

Force strength is down to personal preference, 30 for me is strong enough to give me good feedback, but not too strong that it becomes hard work, i change it for different cars though.

Ok but i can't understand.
For the BF1, for example, i think that for a realistic game i need to block in logitech profile the degrees to 450.
Are u agree ?

Hello World !

In the coming days will come my DFP.
I decided to buy the DFP because I think that my driving limits are caused by ForceEX.

So I wonder how I should set the parameters for LFS in the DFP.

The parameters that I need to know are:
(Controls)
- wheel turn compensation
- force strength
(Misc)
- analogue steer smooth

Do u use the Logitech Profiler ?

If yes, how i need set his internal parameters ?

Thanks !

Hallo !
I'm a S2 user and yesterd i bought the wheel in object.

Are there somebody that use it with LFS ?

I need to know if i have to take on the profiler software or not !

Thank you for help !