Quote from weelob :

Can't get it to work. I mapped the blinkers in Logitech Profiler and it wont do anything if i press buttons. I tried 7 + 8 and on the wheel. I use G25

map the buttons as themselves in the profiler, then set them in the program's config file. I used buttons 4 and 5, aka the paddles on the wheel. The buttons are mapped to themselves as secondary commands, the primary commands are mapped to S and X for paddle shift cars.
here's my settings for G25, I use LFS at 720*

Mine stalls after I bounce it for about 15 secs, then let go of the gas.

Quote from ITGOES :

i just downloaded old skyline how do i use on game need help pleassseeee!!!!!!!!

did you read what he wrote?

I was going to post the following in my previous post, but a sound of the turn signal turning off would be good. I have attached one I recorded from a North American van.
The file is in a .zip file, because the LFS Forums do not allow .wav files to be uploaded.

I'm wondering, how does this program work? Does it use any packets from LFS?

EDIT: It works!

Last edited by Zipppy, Wed, 17 Feb 2010 22:05.

I'm sure a few have been made, but I cannot recall any threads.

I can't seem to get this to work, I disabled all external applications when I tested it.

I am using a wheel, just so you all know.

Do you have LFS on windowed mode?

I don't find anything wrong with LFS' slow progress, Scawen is possibly working his butt off right now perfecting the physics calculation code, which had to be re-written. ever heard of the phrase, "Quality takes time."? The game gets better and better each day. Who cares about updates? most games never did updates as frequently as LFS.


Oh, and why type in full CAPS LOCK?

I have downloaded the script, and I read it a bit, but I was in a rush, so not much stayed in my head.

I have tried it now, and it works.

Quote from morpha :

Yes it is, they don't use different modes but different IDs and the relay allows you to specify different IDs for each redirect.

Ah, okay, I knew something was different between CSR and the Rev Limiter's OutGauge configuration.


So what is (are) the parameter(s) to change the IDs?

I'm wondering, is it possible to run CSR and the RevLimiter by Tommy at the same time, with that script? I know that the programs use different OutGauge "modes", CSR uses mode 0 and the rev limiter uses mode 2.

I had a similar issue with my old LCD monitor for my desktop PC, it was 7 or 8 years old, giving it the occasional knock worked temporarily. I have noticed prior to the screen not turning on, I saw the backlight start fading occasionally. I may think the backlight is dead on your screen, but it's only 3 years old. Is there warranty of any sort on your laptop? I have a netbook from that company, and its warranty was 1 year.

I get it from time to time, and I get a bit annoyed by it. I doubt that it's my shifter's problem, because it works fine on another game.

It is on some other tracks as well, I think I notied it on Aston (Historic I beleive). it's in a hairpin on the top of a hill.

Quote from codyflick929 :

I'm having a problem similar to this. The game recognizes that i have a G25, and but my clutch and H-pattern don't work, even though if i set my shifter to the sequential setting, it works. Please help, imma big newb lol.

This may help. did you set all the controls in the shifter menu?
http://en.lfsmanual.net/wiki/Options#Wheel.2FJoystick

Did an error similar to "follower could not find position" show up?

I haven't had problems with my G25 over a period of what I think is 2 years, but I don't think $100 just for 4 more buttons, quieter FFB, and a reworked shifter is a bit too much in my opinion.

There is an option to choose what FFB device to use under the Axes/FFB section of the controls configuration in LFS. I have plugged in a secondary controller into my computer to demonstrate.


EDIT: maybe the Handbrake and accelerator pedal are conflicting with each other in a way. I never had this issue with any of the controllers I had.

Last edited by Zipppy, Mon, 28 Dec 2009 20:08.

it happened suddenly, on all cars and situations. A fresh install after adding my add-ons did not work.


EDIT: found a solution, just copy a fresh, unmodded "misc" folder over to fix it.

Last edited by Zipppy, Sun, 31 Jan 2010 21:05.

I noticed something strange in LFS recently over the past couple of weeks, it's that the turning signals on the right side of any car have supposedly stopped working, as in not turning on when "8" is pressed, even with a macro-ed command, but it turns on when both left and right turning signals are supposed flash, by pressing the "9" button.
The number 8 however shows up fine when typing it in the chat box. I don't know that it would be worth to do a screenshot or film it.

Last edited by Zipppy, Sun, 31 Jan 2010 21:05.

I'm actually surprised nobody replied to this yet.. It looks like slick monitor, despite it being clunky

Last edited by Zipppy, Sat, 14 Nov 2009 19:24.

Just to point out, Aston has this issue as well.

I use GIMP to make my skins, and it is pretty powerful.
here are a few examples of mine I made for an event I participated in (with the same theme on each car), and the screenshots have an excessive amount of bloom. The skins are distorted in places, like the hood, as I did not feel like compensating for it, but it still looks good.

Quote from masterlooser15 :

thank you, but.. i have a notebook grafik card.. so there is no "span"

i have "single" "clone" "dualview"

What company made your notebook drivers?