Quote from Tazka :

Be afraid of speedbumbs.

Lol be lucky not to scrape on the speedbumbs in my street

Ever since the crazy bus drivers started a route through the street the residents complained they were 'speeding' through the street, they put speedbumbs in but there more like mountains
There not that high but the angle up and down onto them is toooo steep

Quote from 65D :

Okay I can say to you that idea.

Your computer sucks.

Not everyone can afford to have a top of the range PC, But yeah its not great spec
1GB memory is nothing these days and Pentium.. well it just sucks

I installed win7 on a PC with 2.4GHz DualCore & 512MB RAM and it runs great on Ultrastar (karaoke game)
Never tried LFS on it but I'd say it be 10-20FPS

Lower = Faster Bounce

Ok found a fault in the OutGauge Version, Updated 1st Post Attachment
I had commented out the part that does the actual 'bounce' after I had tested it

Last edited by DavidTiger, Sat 27 Feb 2010, 00:40.

I'll have a look at the OutGauge one, seems to work for me

Try changing the bounce timer, I found that 170 was about right for me/my pc, but ah well
I'll look at it.

Wierd.. Set the Ignition key? I being default.

Had the same bother with VLFSDash all worked for me but no-one else

Downloaded the OutGauge Version?

revlim-v2OG.rar (42.7 KB, 0 views)
^^ there if you havn't

Just make sure the outgauge port in the settings (my program) are the same as LFS's cfg
Default is 35555

Quote :

OutGauge Mode 2
OutGauge Delay 1
OutGauge IP 127.0.0.1
OutGauge Port 35555
OutGauge ID 1

Those Settings Work for Me

Ok check first post again, Added a version which uses OutGauge Fully, NO Memory reading

Try now, File Updated in 1st post..

my website has a pretty good tune

www.scoredart.co.cc

Ok guys HUGE Update on this

Added:
Customisable Timers - Idle, Redline Bounce
Customisable Ignition Key
Individual Low, High Redline Values on each car

Changed:
Save File Layout (not really important but mention anyway)

Removed:
Nothing


Where To Download?
See Attachments On 1st Post

Do you have 'Ignition' Key set as I ??
Should be customisable by the next release, soon!

Quote from AndreasNOR :

Put it in the LFS folder, and open it, and open the game, and press scroll lock and then just drive.. it didn't work for me :O

Are you using Patch z28?? Because it uses Addresses it limited to z28 and wont work on other patches..

I think its better to change to OutGauge?? So it supports other LFS Patches and For people who dont want programs messing around in RAM Addresses

Not sure about if its relevant to cpu speed, Timers should be the same intervals on any computer...

Ill be updating the app soon with added changeable timers, top/bottom bounce values..
Which would allow people to customise their bounce to their needs..

Is there a way that lfs can report whether the engine is running or not to external app, via Outgauge, Insim etc??

Yea, Im adding customisable bounce timers, so u can make it faster or slower
Its made based on my pc's specs 3.7GHz, where I can keep it on the limiter for over 5 mins and it wont cut out..

I need to try o get a way to check if the engine shut off and turn it back on, because it can sometimes miss turning it back on and you have to start the engine yourself

Got up thismorning to find around 2 inches of snow

Beta App Attached In 1st Post
All Cars (not BF1) Supported

ToDo:
Customisable Redline (Top/Bottom 'cutoff')
Customisable 'Bounce' Rate

Fix any bugs (if any)


Thanks!
-David

Quote from pik_d :

I'll just note that when you get to the BF1, don't have this option. The BF1 never "stalls", and doesn't have a starter motor.

Yea, I was told about that and removed the option for that

Quote from pik_d :

Also memory editing seems very... iffy. Obviously you're not doing anything wrong with it but I'm not really sure how good of an idea this is.

I did memeory editing, Well really its only reading memory nothings being changed, because it was faster for me to make, and less hasstle over port settings in lfs, It would automtically 'connect' to LFS when opened..

What would the majority of you guys prefer, and Outgauge version or the Memory Reading Version??
I dont really wanting to be updating 2 separate programs, so one would be easier
If it comes to it that 50/50 you want each then I may be able to add a setting to use either OutGauge or Memory Reading in one

*I'll update the 1st post with a link to the app in around 10 minutes, from posted time*

Last edited by DavidTiger, Wed 24 Feb 2010, 12:10.

Quote from DavidTiger :

Tomorrow I'll finish off the test version and post here will all the cars (apart from BF1 since it dont have a starter motor

Should. have made more clear in the 1st post

Well the app was originally made for a friend and he wanted that feature. I added settings so that features can be disabled, rather than remove them completely.
Personally I don't see the point in that feature but maybe others would

Quote from bunder9999 :

making the redline thingy adjustable could be cool too... but it would need two settings, the bottom rpm (when to resume engine) and the top rpm (when to cut engine)...

edit: oh, and maybe a way to prevent the engine from starting again if the engine sits on the rev limiter for too long.

Yea, After the test app I'll post tomorrow with all the cars in it.
I'll make the top/bottom redline adjustable

Yea would be pretty cool addon for those who like to redline their cars with no consequencies Maybe their will if I manage to add that...

Quote from hp999 :

Holy cow mate,this is just sweet! I'm so waiting for the version for all the LFS cars. Nice mod,keep codin'!

Quote from plejmo :

wow.. get this to work on the xrt and I'll grab a copy for sure :P

WOW! Never knew I'd have such a responce on this app
Tomorrow I'll finish off the test version and post here will all the cars (apart from BF1 since it dont have a starter motor)

Best thing is it dont use Insim or Outgauge so ur ports are free for other mods
Thanks!
-David

Thanks, I'll make up another beta so someone can test them out

Current Version: 3.0
Source Version: 3.0
(18/04/10 - 19:40)

I made a program for my friend which adds a 'bouncing' rev limiter and engine anti-stall (keeps the engine from cutting out after 30secs or so of idle)
I thought I'd release it here for anyone who would want to use it

(click for full-size)

Anti-Stall: As you know LFS stop the engine after a certain time of idling, my friend wanted a program to stop that happening.. This program will stop/start the engine every 10 seconds when idle (hardly noticable:nod

'Bouncing' Rev Limiter: He also wanted a rev limiter that bounces off the redline, Which I have added to this program aswell

This Application Does NOT Use InSim nor OutGauge to read values, Rather it reads all values from RAM (Memory Addresses)
(OutGauge Version Can Be Made If Wanted)

Release Change Log:
Added:
V2.0:
Customisable Timers - Idle, Redline Bounce
Customisable Ignition Key
Individual Low, High Redline Values on each car

V2.1:
Activation Key Changed From SCROLLto HOME

V2.2:
Customisable Activation Key!
Smaller Increment Adjust on Bounce Timer
Now you can go in steps of 1 instead of 10, More precise intervals

V3.0:
Sorted the Stalling Bug!!??
(reply here if it worked )
(Please Report Any Problems You Counter)


Source Code Available To Download!!
Licence To Use/Edit/Redistribute My Code
Thank You for taking interest in my Revlimiter Source Code
Please feel free to edit/update the source code...
All Versions of revlimiter have to be released into this thread

DO NOT TRY TO RELEASE THIS PROGRAM AS YOUR OWN!
ALL PART OF THIS SOURCE WAS WRITTEN BY DavidTiger

If you agree as above you may download the source
Direct Download

Last edited by DavidTiger, Sun 16 Oct 2011, 01:00.

Played the Multiplayer Demo of AvP and tbh I thought it wasn't that good