Since you might not get a software solution (today) you could try a physical adjustment to scale them up. Bring the two smaller monitors forward, which makes them bigger to the spectator. With this setup you can also overlap the bevels so you get some more screen realestate back to.
I used to have a 1x 19" and 1x 22" setup and that's how I made them line up. You might have to use a couple of thin books or something to lift the monitors the the exact height to make them line up.
Getting in and out of a Single Seater type model (which is what Aoun wants I think) will always be difficult. But Bokujishin's design has a good idea to overcome that. The wheel lifts up which will give more room to stand up and climb out.
1920x1080
Yes latest drivers. Ran DriverCleaner numerous times. Uninstalled FRAPS as the ATi didn't like that running. Installed ATi Tools to make use of passive profiling where a profile loads when the associated game loads. CCC can't do this..
All games I play are on med graphics settings, except LFS ia have hi-res textures and everthing maxed out except dynamic LOD reduction on 0.5 and bloom for some effects.
* BL1 on the start with no AI, 130 FPS (very similar to before using 9600GT)
* GTR-e still drops down to 48 FPS in the Fuchsröhre dip (very much the same as before using 9600GT)
* TDU still bottoms down to 45 in some areas (very similar to before using 9600GT)
* DiRT cant use AA (at all) even using ATi tools or CCC
* GTA iv only gained about 8 FPS (now min is 48)- although I think this is a CPU bottleneck
* BlackShark still nowhere near 60 FPS
It does look a little better on the AA in LFS and the AF is a little crisper and cleaner. The nVidia9600GT had a big issue with the edges of some objects and could not apply AA to them. That's fixed. But all other games pretty much look the same.
Temp of the card runs up to 64 deg C and is idle at 40 deg C at start up.
I'm not going to give up on it until after a fresh WinXP or 7 install and then see how it goes.
I didn't aim to hi-jack this thread, just wanted to know if I must install Win7 now I have this card, or not.
I just got a 4890. Not noticing too much of an improvement over my n9600GT Configuring it without a passive profiler tool in CCC was a bitch and quite a few compatibilty issues pissed me off for a while. Do I have to get off XP to get proper utilisation of this card or something?
If you read that thread though, I doubt you will feel more because LFS seems to remove (dampen out) most of the FFB effects it has available to it. Some slight changes to the tyres physics won't fix that. It might feel somewhat better, but only marginly. I don't think the full potential is realised.
Just with that mod you can tap the throttle repeatively and really feal some amazing weight shift in the front. You feel the curbs stronger and you feel most things that are just lost.
Does it crash when on the main menu? Mine crashes/freezes when in 3d mode and is safer for me to full screen swap inside 2d menus only, but I am using 250MB GPU ram from bloom mod and hi res textures. (1GB card, but who the hell knows what the new multiscreen tweaks are doing to it, FTR I only use 0,1,0 screen mode)
WinXPsp2 32bit
e8400, 4GB, HD4890 1gb
Also have you tried just a fresh install on Z25? (In case you are using any mods or hi res textures)
I still don't get it how the pit's exit line intersects directly with that chicane's exit line. Also the pit wall means the pit exit's vision is blinded to.
1) Screen was too high on a normal desk, now with a proper rig my in game dials now appear through the gap in g25 wheel opening. Also the g25 wheel super-imposes (hides) the virtual wheel in other games where it cannot be turned off.
2) Pedals are too low in a desk chair. Feels like driving in a 4WD or a bus when your knees are at 90 degrees. I had to raise my pedals up under my desk and they still weren't high enough.
3) Desk chair kept sliding backwards on its castor wheels. Now my chair can be tilted and slide fowards and backwards.
4) $10 Real car seat is twice as comfortable than even a mid-ranged office chair for long stints.
5) g25 shifter can only be mounted to the desk next to the wheel. Now I have the shifter right next to my thigh and also I now have an arm rest.
6) Hard mounted handbrake in a natural position.
7) Keyboard placed behind the wheel or on the side of the desk creates back-ache when typing, now I have my KB at arms rest and I do not have to lean forward to type or to use the mouse.
8) Vibrations from the wheel FFB transfer into the frame and you feel it in your seat.