Quote from DragonCommando :

If you are engine braking it should use the same amount of fuel as it would at the same RPM. so if you are engine braking or cruising at 3k RPM, it should use the same amount of fuel.
That is assuming the fuel system is static and just adds fuel as it needs to, if the computer is programed to, it may actualy lower or cut fuel, but I've never thaught of testing it.

Dunno what a "static fuel system" is, as i dont really have a dynamic one..

but i DO know that if u engine brake u do not use any fuel, if u have injectors.. on a carb, there is no way to cut the fuel easely..

Quote from bunder9999 :

isn't autocross user-made material?

well it aint user-made tracks.. its just one track which u can change layout on

one of the easiest things to do if u want more FPS is to change "MinimumSleep" to 1ms its somewhere in the settings of LFS.. it makes my fps jump from 120 to over 350..

Quote from speed1 :

Gear ratio might have been a better word.

well yes, but still dont really understand how u mean.. manual gear ratios in a tranny thats constantly variable? sounds odd

Quote from 128MB :

no i mean like when cruising, you can let the car do 1 million miles automaticly

and what would the car do if someone infront brakes? if one wheel accidently hits the grass and u spin? how would it recover?

Quote from ADX.14 :

As you know, only "shift + arrows" combinations are assigned for changes in F11 and F12 options. This is difficult for keyboard users because the change attempts block the total control of car. In order to simplify changes, "assignable keys" would be a solution. i.e. "Ctrl" or "Alt" for switching the menu options while "PgUp" for increasing and "PgDN" for reducing.

not that i ever use keyboard to drive, but i understand it must be frustrating.. so a big +1 from me

Quote from speed1 :

The things thats even worse than that (I can say from experience) is the CVT's with the pre-programmed "manual" shift points. Thats probably the worst thing ever.

didnt know CVT's had shiftpoints?

omg just noticed that i bumped an almost 24hour old thread

i just had to open up my g25 shifter, as a friend of mine spilled some sort of choco-drink into it... so i had no 6th gear, the reverse was always in :P

sorted it by opening the whole damn thing and resoldering the two wires for the "push-down-for-reverse" button, and then cutting the cables that connect to the little pcb with the above mentioned button. put some electricaltape on it and connected the cables again... now it works but the thing is that i no longer has any warranty on it :P

oh well..

Quote from zeugnimod :

Corrected.

why correct when he corrected it himself?

he added "And before you get your hopes up, this is just my idea, not the devs. Or could it?" in the end.

Quote from amp88 :

They just want to get places reliably and cheaply.

i dunno what automatics you have been driving (electric, steam or rubberband powered) but i have NEVER seen an automatic that is CHEAPER to drive then a manual?.. pls enlighten me..

Quote from The Very End :

Hehe, by barber do you mean the one giving you a haircut or the one sorting out facial hair?

Either way, I seem to be able to endure ladies small talk, but these damn mens are just plain anoying.

OFFTOPIC: Yes "mens*" is never fun..
*) Mens in swedish is "period"

sry for OT...

Quote from batteryy :

8 7 6 . really the worst joke ever, only finnish may undestand, say this in swedish and youll find out...

im swedish and really dont get the fun part

Quote from J@tko :

You're fine until you go through the flat-out chicane halfway down the next straight. That's when the turbo kicks in

if u floor it, u'll have full boost within 2 seconds.. atleast do i have that here..

Quote from Fuse5 :

lolol.
SuperPi - 1M - 50.5 s
AMD Athlon 3500+ @ 2,21GHz - 2x512MB DDR-400 DIMM

and it wasnt idle.

Edit: 42,9s in HyperPi after setting the priority to realtime.

i get 16.2s in HyperPi @ REALTIME.. which tells me that this program sucks :P

and 11.something in SuperPi mod 1.5x

Quote from Austin31287 :

i get liek 12 to 15 fps when in grid at times and it so hard to race whn u get a gfx lagg

u have a 7900GS and a P D 2.8GHz.. u SHOULD NOT get that low amount of fps.. i had an p4 3ghz and a 7800... i had over 100fps :O

Quote from Jakg :

Yes it does seem very slow - but SuperPi has always favoured Intel and this is just a plain install of Windows 7 - I haven't even tweaked the services yet.

okey.. well i do superpi 1M in 11.8 secs :P thats enought for me.. but wPrime sux on my comp...

tweaked services? i have a standard installation of 7 here.. no need for tweaking :P

Quote from MijnWraak :

I am selling similar system for $150 to friend. So with the monitor you're sure to get 250. (probably around 400 if you dont want a quick deal)

bump.ftw

oh well.. how the f's should he be able to get 400 for that? :O nothing of that is new..

Quote from Jakg :

3DMark06 - 11773.
SM2 - 4580,
SM3 - 5147,
CPU - 3993.

SuperPi 1M - 24.975 Seconds.

wPrime 32M - 13.649 Seconds.

Seems ok-ish.

24s for the 1M? aint that quite slow for ur proc?
EDIT: omg.. i got 21s for the 32M in wPrime :P

Last edited by Feffe85, Mon 25 May 2009, 06:06. Reason : zomg.lolz.wtfz

i had a p4 3ghz ht before, and it gave me over 120fps in lfs.. so ur pentium d should yield better fps i think :O

omg, retard-weekend?

whatever, nvidia or ati, they're good at different things.
i.e i had an old gefore2 pro.. it was good as hell, tho it didnt work in all the games i had so.. bought an ati 9200le, it was good, for awhile... upgraded my comp, got an 7300gt, it was AWESOME.. upgraded again -> 7800GTX, and now im on a 8800GT..

my point is, we all go through different stages in life where we love one brand, then move on and gets the other brand.. all my cards have been awesome tbh, just that you need to upgrade after a while anyhow.

im guessing my next card will be an ATI nnnnx2 as i have always wanted one of those and it will kick the crap out of the card i have now. so tbh its not comparable..

fanboy this, fanboy that... its just bullshit anyway. we will NEVER think the same about all stuff that u can put in a computer ffs.. sure im not an ATI-lover.. but i would sure as hell want to try one of their newer cards.

EDIT: whats up with the poll? "nvidia, ati or integrated" ? wtf.. if i have an integrated ati/nvidia, how do i do then? :/ should be like "intel, nvidia, ati etc etc etc etc"

Last edited by Feffe85, Fri 22 May 2009, 13:32. Reason : wtf.poll.sucks.ass.ffs

Any place special to turn when the wheel ****s up? i mean if i want a new one on the warranty? :/

EDIT: yeah no-shit i should turn to Logitech, but any special mail or webpage where i should contact them? :P

Quote from anttt69 :

i need to find out the gap between the mounting holes.

do you have the 9500 or the 9800 at your place? then just unscrew the stock cooler..?

Quote from DragonCommando :

0.8bar (11.6psi) is not stock for any car I know of. If that is being produced by a stock turbo it will not stay that high for the entire speed range of the engine.

The Saab 9-5 2.3T has a max boost of 0.8bar stock

Quote from Intrepid :

Religion is about belief and faith and thus people don't need evidence to think it's true or not.

DAMN TRUE! Every singel Christian that "believes" in God and shit, but they have no proof of his/hers existance...

All of this is bull from my POV..

Quote from CodieMorgan :

Weather you care about it or not, the fact that you clicked "I accept" means that YOU HAVE TO ABIDE by there terms.

That's not true. As nobody can check if you DO as you said you would when you pressed the "i agree"-button. You do not HAVE TO abide, but the producers/developers wants to make sure you know that you're not allowed to do anything else then what is written in the license.